Denon AVR-4802R User Manual
6
5
CONNECTIONS
• Do not plug in the AC cord until all connections have been completed.
• Be sure to connect the left and right channels properly (left with left,
• Be sure to connect the left and right channels properly (left with left,
right with right).
• Insert the plugs securely. Incomplete connections will result in the
generation of noise.
• Use the AC OUTLETS for audio equipment only. Do not use them
for hair driers, etc.
• Note that binding pin plug cords together with AC cords or placing them
near a power transformer will result in generating hum or other noise.
• Noise or humming may be generated if a connected audio equipment
is used independently without turning the power of this unit on. If this
happens, turn on the power of the this unit.
happens, turn on the power of the this unit.
Connecting the audio components
• When making connections, also refer to the operating instructions of the other components.
SPEAKER SYSTEMS
PRE OUT
DVD
TV
MONITOR
Y
P
B
/C
B
P
R
/C
R
Y
P
B
/C
B
P
R
/C
R
Y
P
B
/C
B
P
R
/C
R
Y
P
B
/C
B
P
R
/C
R
COMPONENT
VIDEO
DBS/
SAT
ANTENNA
AUDIO
DIGITAL
EXT. IN
FRONT
LOOP ANT.
AM
CENTER
FM COAX. 75
Ω
FR
FL
SW
C
SR
SL
SBR
SBL
SURROUND
-A
R
R
SURROUND
-B
SIGNAL
GND
GND
PHONO
CD
FRONT
CENTER
SB
SW
SURROUND
DVD
DVD
VDP
TV
DBS/
SAT
V. AUX
VCR-1
VCR-2
VCR-3
VCR-1
VCR-2
VCR-3
S-VIDEO
VIDEO
1-MONITOR-2
VDP
TV
IN
OUT
IN
IN
OUT
RS-232C
OUT
PRE OUT
SPEAKER
IMPEDANCE
IMPEDANCE
FRONT, CENTER,
SB / MULTI
SB / MULTI
SURROUND
A OR B
6~16
Ω
6~16
Ω
8~16
Ω
A + B
DBS/
SAT
CDR/
TAPE
CDR/
TAPE
MULTI
ZONE
V. AUX
VCR-1
VCR-2
COAXIAL
1
2
3
1
2
3
4
5
5
4
OPTICAL
VCR-3
VCR-1
VCR-2
VCR-3
R
SB / MULTI
ROOM TO ROOM
POWER
AMP
OUT
OUT
OUT
IN
R
R
L
R
L
R
L
IN
IN
IN
IN
OUT
OUT
OUT
SPEAKER SYSTEMS
AC OUTLETS
AC IN
SWITCHED TOTAL 120W (1A) MAX.
AV 120V 60Hz
FRONT
SURROUND
-A
L
L
SURROUND
-B
L
SB / MULTI
L
REMOTE CONTROL
R
OUTPUT
L
R
L
DIGITAL AUDIO
DIGITAL AUDIO
R
L
R
L
OUTPUT
INPUT
R
L
R
L
OUTPUT
INPUT
OPTICAL
COAXIAL
OUTPUT
OPTICAL
DIGITAL AUDIO
DIGITAL AUDIO
B
R
L
R
L
R
L
R
L
B
CD player
Connecting a CD player
Connect the CD player’s analog
output jacks (ANALOG OUTPUT)
to this unit’s CD jacks using pin
plug cords.
output jacks (ANALOG OUTPUT)
to this unit’s CD jacks using pin
plug cords.
Connecting a turntable
Connect the turntable’s output cord to the AVR-4802R’s PHONO jacks,
the L (left) plug to the L jack, the R (right) plug to the right jack.
the L (left) plug to the L jack, the R (right) plug to the right jack.
NOTE:
This unit cannot be used with MC cartridges directly. Use a
separate head amplifier or step-up transformer.
This unit cannot be used with MC cartridges directly. Use a
separate head amplifier or step-up transformer.
If humming or other noise is generated when the ground wire is
connected, disconnect the ground wire.
connected, disconnect the ground wire.
Turntable
(MM cartridge)
(MM cartridge)
Ground wire
Extension jacks for future use
AC cord
(Supplied)
(Supplied)
Connecting the pre-out jacks
Use these jacks if you wish to connect external power amplifier(s) to
increase the power of the front, center, surround and surround back
sound channels, or for connection to powered loudspeakers.
When using only one surround back speaker, connect it to left
channel.
increase the power of the front, center, surround and surround back
sound channels, or for connection to powered loudspeakers.
When using only one surround back speaker, connect it to left
channel.
Connecting the AC OUTLETS
AC OUTLETS
• SWITCHED
• SWITCHED
(total capacity – 120 W (1 A.))
The power to these outlets is turned on and off in conjunction with
the POWER switch on the main unit, and when the power is
switched between on and standby from the remote control unit.
No power is supplied from these outlets when this unit’s power is at
standby. Never connect equipment whose total capacity is above 120
W (1 A.)
the POWER switch on the main unit, and when the power is
switched between on and standby from the remote control unit.
No power is supplied from these outlets when this unit’s power is at
standby. Never connect equipment whose total capacity is above 120
W (1 A.)
NOTE:
Only use the AC OUTLETS for audio equipment. Never use them for
hair driers, TVs or other electrical appliances.
hair driers, TVs or other electrical appliances.
AC outlets (wall)
AC 120V, 60Hz
MD recorder, DAT deck or other component
equipped with digital input/output jacks
equipped with digital input/output jacks
CD player or other component
equipped with digital output jacks
equipped with digital output jacks
Connecting the DIGITAL jacks
Use these for connections to audio equipment with digital output. Refer
to page 28 for instructions on setting this terminal.
to page 28 for instructions on setting this terminal.
NOTES:
• Use 75
• Use 75
Ω
/ohms cable pin cords for coaxial connections.
• Use optical cables for optical connections, removing the cap before connecting.
Connecting a tape deck
Connections for recording:
Connect the tape deck’s recording input jacks (LINE IN or REC) to this unit’s
tape recording (OUT) jacks using pin plug cords.
Connections for playback:
Connect the tape deck’s playback output jacks (LINE OUT or PB) to this unit’s
tape playback (IN) jacks using pin plug cords.
Connect the tape deck’s recording input jacks (LINE IN or REC) to this unit’s
tape recording (OUT) jacks using pin plug cords.
Connections for playback:
Connect the tape deck’s playback output jacks (LINE OUT or PB) to this unit’s
tape playback (IN) jacks using pin plug cords.
CD recorder or Tape deck