Denon avr-3806 0026 vers check Service Manual
1
Page 1 / 7
Confirming the firmware’s number after upgraded
After completion of the updating operation, the new version number can be confirmed by starting
up the AVR-3806 according to the following procedure.
With the following operation, the AVR-3806 can be set to the Flash-ROM Version-Number
Confirmation Mode.
Turn the power of the AVR-3806 on, while holding both “STATUS” button and
“ROOM EQ” button on the front panel simultaneously.
Every time the “STATUS” Button is pressed, version numbers of the MAIN, SUB,
etc. are indicated on the front panel section in the following order.
Depression
Button
Name
Remarks
1 STATUS
MODEL
AVR
2
STATUS
MAIN
00.72
3 STATUS
SUB
00.56
4 STATUS
DSP
00.45
STATUS
ROOM EQ
Turn
Power ON
+
+