Denon 1083 User Manual
68
12 LISTENING TO THE RADIO
If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
tuning” operation.
1
Set the input function to “TUNER”.
FUNCTION
2
Watching the display, press the
BAND button to select the desired
band (AM or FM).
BAND button to select the desired
band (AM or FM).
3
Press the MODE button to set the
auto tuning mode.
auto tuning mode.
4
Press the TUNING UP or DOWN
button.
button.
Auto tuning
“Auto” appears on the display.
Automatic searching begins, then
stops when a station is tuned in.
stops when a station is tuned in.
(Main unit)
(Remote control unit)
Manual tuning
1
Set the input function to “TUNER”.
1
AMP
3
1
2
4
(Remote control unit)
(Remote control unit)
(Remote control unit)
• Check that the remote control unit is set to AMP.
FUNCTION
2
Watching the display, press the
BAND button to select the desired
band (AM or FM).
BAND button to select the desired
band (AM or FM).
3
Press the MODE button to set the
manual tuning mode.
Check that the display’s “AUTO”
indicator turns off.
manual tuning mode.
Check that the display’s “AUTO”
indicator turns off.
(Main unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
4
Press the TUNING UP or DOWN button
to tune in the desired station.
The frequency changes continuously
when the button is held in.
to tune in the desired station.
The frequency changes continuously
when the button is held in.
(Remote control unit)
NOTES:
• When in the auto tuning mode on the FM band, the “STEREO”
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.