Denon avr-4311ci dz10-154 Service Manual

 

 

       

 

 

 

 

No. :  DZ10-154 
Date:

October 13, 2010 

 

 

AVR-4311CI   

 

 

 

 

 

Correction of the Firmware via DFW

Countermeasure is applicable only upon claim from the customer.   

 

 

 1) When listen narration etc. after set the setting of "MultEQ XT32" 

to "Audyssey" or "Audyssey Byp. L/R" or "Audyssey Flat", the sound is echoed.  
2) The data of AUTOSETUP is not saved correctly in SETUP MENU.  
3) The sound might not be outputted when the surround mode is changed. 
 

 
Solution:  

We corrected the firmware so that no malfunction occurs. 

 
METHOD OF UPDATING via RS232C. 
 We will supply the following program files for updating the subject models.  
Please refer to the following Instruction Manual for updating. 
 
DFW software:  
DFW_0044_AVR4311_(Rev.1.0.15).exe:     
Firmware Update Program for ALL 
 
DFW_0044_AVR4311_Rev.1.0.15_Manual_EN.pdf:     
Instruction Manual for Firmware Update Program for ALL 
 
Firmware:  
AVR4311CIEU_EC_000100440100-0002.bin.zip:   
Firmware 
 
 

The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document.