Manualsbrain.com
  1. Manuals
  2. Brands
  3. Eaton
  4. PC5585-AB
  5. User Manual

Eaton PC5585-AB User Manual

Download
Page of 5
© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.
www.pulizzi.com • pulizzisales@eaton.com • 800-870-2248 • Fax: 605-334-4999 
2
REQUIRED CABLE ASSEMBLY OPTIONS:
CBL103: 120V/30A with 10/3 cable 9’ long terminated with a NEMA L5-30P
CBL104: 240V/30A with 10/3 cable 9’ long terminated with a NEMA L6-30P
CBL105: 240V/30A with 3x4.0mm Harmonized cable 9’ long terminated with an IEC 60309 32A plug
This system is designed to be controlled Locally or Remotely via a remote control panel.          SOLD SEPARATELY
SPECIFICATIONS
PC5585-AB
PC5585-AB1/MTD
PC5585-AB/MTD
PC5585-CF
PC5585-CF1/MTD
PC5585-CF/MTD
Approvals
UL/cUL, TUV, CE
UL/cUL, TUV, CE
UL/cUL, TUV, CE
UL/cUL, TUV, CE
UL/cUL, TUV, CE
UL/cUL, TUV, CE
Voltage I/O, (50/60Hz)
120V/240V~
120V/240V~
120V/240V~
120V/240V~
120V/240V~
120V/240V~
Current Input
20A
20A
20A
30A
30A
30A
Current Output
16A
16A
16A
24A
24A
24A
Full Load VA
1920VA/3840VA
1920VA/3840VA
1920VA/3840VA
2880VA/5760VA
2880VA/5760VA
2880VA/5760VA
Circuit Breaker
20/20A
20/20A
20/20A
20/20/30A
20/20/30A
20/20/30A
Multiple Time Delay
Remote only
MTD™ Up
MTD™ Up/Down
Remote only
MTD™ Up
MTD™ Up/Down
Outlets: IEC 60320
Type C13
Type C13 
Type C13
Type C13
Type C13
Type C13 
EMI/RFI Filter
20A
20A
20A
30A
30A
30A
Surge Suppression
270V
270V
270V
270V
270V
270V
RACK MOUNTED
•
19” x 2U (3.4”) x 8.5” (recessed)
•
Approximate shipping weight: 18 lbs.
IEC 60320 OUTLETS (14)
•
12 switched (4 per switched section) on 
the front panel and 2 unswitched on the 
rear panel.  Each outlet is rated by UL    
and CSA at 125V~ / 15A or by VDE at 
250V~ / 10A
REMOTE SELECTION SWITCH
•
Local: Power “on” to the switched outlets
•
Off: When breaker is “on” but this switch 
is in the “off” mode, you will have power 
to the unswitched outlets only
•
Remote: Power “on/off” to the switched   
outlets via a remote device
•
Latching remote: PC5585-CF1/LT 
only - the selection switch is wired for    
Remote/Off/Remote - There is no local   
control
VOLTAGE SELECTION SWITCH
•
120V~ Single Phase 50/60Hz
•
240V~ Single Phase 50/60Hz
EMI/RFI FILTERING
•
Common Mode Line to Ground
•
Differential Mode Line to Line
SPIKE/SURGE SUPPRESSION
•
Line to Line
(3 N/O) REMOTE I/O PORTS
•
Remote on/off and EPO control, EPO    
overrides remote and local control
•
Sequence Power Up additional 
equipment down line (standard on all units)
•
Latching remote - (N/C) EPO, 
momentary start on PC5585-CF1/LT only
POWER INPUT
•
External terminal block for power input is 
on the rear panel
•
High Voltage Cover with attached  
 
cable/plug is available, reference below   
part numbers
MULTIPLE TIME DELAY (MTD™) (Optional)
•
After Section 1 powers up, 4-seconds    
later Section 2 powers up, which is  
 
followed 4-seconds later by Section 3.    
Four seconds later the sequenced remote 
activates the next system in line
•
Models with (/MTD) sequence power up 
and power down in reverse order
•
Models with (1/MTD) sequence power    
up but not down
•
Models without MTD will power up all 12 
switched outlets at once
•
Sequenced remote is standard on all    
systems
(6) INDICATOR LIGHTS
•
(1) Main power “on”
•
(1) Each, Section 1, 2, 3 power “on”
•
120V~ or 240V~ indicator to show which 
voltage is selected
OVERLOAD CIRCUIT PROTECTION
•
Electromagnetic breaker provides manual 
on/off switching and trips in an overload 
condition
Front
Back