Denon dn-x1100 pz10-050 Service Manual

Page of 2
 
100 Corporate Drive Mahwah, NJ 07430
 
 
       
 
 
 
Service Bulletin
 
No. : 
 PZ10-050 
Date:
 
September 13, 2010 
_____________________________________________________________
 
 
Model:
 
DN-X1100 
 
 
 
 
 
 
 
Subject: 
1) Change of the Integrated circuit (IC105, IC205, IC305 and 
IC405).  
2) Modification of the Transfer PWB. (For the parts change of IC105, IC205, 
IC305 and IC405.) 
This is information only. 
 
 
 
 
 
 
 
 
Symptom:
 1) The parts changed from "M51132L" to "R2A15221SP". 2) It is 
shape changes from "DIP (14pin)" to "SOP (16pin)". 
 
 
Cause: 
1) Production end of the Integrated circuit.  
2) Because there is no parts of the same shape.
  
 
Solution: 
1) The parts changed from "M51132L (Parts number: 
00D9587036103)" to "R2A15221SP (Parts number: 941239003280S)".  
2) Change a "TRANSFER PWB". 
 
Caution!:  
1) There are not compatible before and after the change in parts 
(IC105, IC205, IC305 and IC405) and "TRANSFER PWB".  
2) The "TRANSFER PWB" doesn't have the parts number for "nsp".  
3) Please refer to attached material for the content after it changes.  
-PWB: Please refer to the material "PZ10-050_ TRANSFER PWB.pdf".  
-Circuit diagram: Please refer to the material "PZ10-050_SCHEMATIC 
DIAGRAMS.pdf". 
______________________________________________________________________________________ 
CONFIDENTIALITY NOTICE: 
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their 
employees.  This document may contain information that is privileged, confidential and may be protected from disclosure under 
applicable laws and terms of the DENON Service Agreement.  Any distribution, disclosure, dissemination or copying of this 
document and the information it contains is prohibited.  No responsibility will be accepted by DENON for any damage, injury or loss 
resulting from the misuse of the information contained in this document.