Nokia 2180 Service Manual
PAMS
Technical Documentation
NHD–4NX
Quick Guide
Quick Guide
Page 4
Original 11/97
When you want to clear the display
Press and hold
CLR
To Make An Emergency Call
Before attempting any emergency calls, see “Emergency Calls” on page
64 for important safety information.
64 for important safety information.
1)
Switch your phone on and make sure service is available
2)
Press and hold
CLR
to clear the display. Enter the emergency
number (e.g. 911) and press
SND
. Give your location
and do not
end the call until permission is
granted.
Emergency Key 9
This feature allows you to attempt emergency calls with a single push of a
button. Emergency Key 9 (Menu 3 4) must be ON for this feature to work.
button. Emergency Key 9 (Menu 3 4) must be ON for this feature to work.
Press 9 then
SND
OR
Press and hold 9 for more than 4 seconds
Note: When Keyguard is ON, calls may be possible to the emergency number programmed into your
phone (e.g. 911 or other official emergency number). However, Emergency Key 9 will not
operate.
IMPORTANT: Official emergency numbers vary by location (e.g. 911).
Your phone has an emergency number programmed into your phone that
can be dialed automatically with Emergency Key 9. However, this may not
be the proper number in all circumstances.
Your phone has an emergency number programmed into your phone that
can be dialed automatically with Emergency Key 9. However, this may not
be the proper number in all circumstances.
Keyguard
This feature helps prevent accidental key presses, especially if you wear
your phone on a belt clip or keep it in your pocket.
your phone on a belt clip or keep it in your pocket.
When Keyguard is activated and there is no call in progress, key presses
will not be accepted and key tones will not be generated, except for calls
to 911 (or other official preprogrammed emergency numbers) and
will not be accepted and key tones will not be generated, except for calls
to 911 (or other official preprogrammed emergency numbers) and
SND
and
END
. If the PWR key is pressed, the lights will come on.
To quickly activate Keyguard
Press and hold
END
until Keyguard active appears on your
display
This method can be used at any time, even at the end of a call.