Addonics RAID Tower IV RTIV435SMR5 Leaflet

  

INTRODUCTION

 

 

 

 

 

 

www.addonics.com

Addonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131

Phone: 408.573.8580 | Fax: 408.573.8588

    

The RAID Tower IV is based on the Storage Tower platform that features four 5.25" drive bays in a lightweight and compact chassis with 

a stylish and functional front bezel. Depending on the model, up to five 3.5" hard drives can be installed into the RAID Tower IV. The 

drives can be configured into a RAID set and connect to the computer via a single USB 3.0, USB 2.0 or high speed eSATA connection. 

Each model comes with everything you need to connect it to your computer. All you need to do is provide your own hard drives and 

configure the RAID via a simple onboard rotary switch or software utility (depending on the model of the RAID Tower.)   

Connect to system via USB 3.0 / 

2.0 or eSATA port (connecting 

cables included).

Install up to five 3.5" SATA hard 

drives of any capacity (drives not 

included).

4 drives are installed onto drive 

tray that can be added or removed 

like tape cartridge from each drive 

bay, one drive can be added or 

removed like tape cartridge from 

the drive bay with no special tool 

required.

Drives can be configured as 

RAID0 (Striping), RAID1 

(Mirroring), RAID 5 (Parity), 

RAID10 (Mirrored Striped), JBOD 

(Concatenation), Clone Mode 

(N-Way Mirror) using built-in 

hardware RAID.

RAID setting via software utility 

under Windows or via jumper pins

OS independent, can be used on 

any system.

RAID diagnostic via LED light

Connect to system via USB 3.0 / 

2.0 or eSATA port (connecting 

cables included).

Install up to three 3.5" SATA hard 

drives of any capacity (drives not 

included).

Install up to two 2.5" SATA hard 

drive of any capacity (drives not 

included).

Drives are added or removed like 

tape cartridge from each drive bay 

with no special tool required.

Drives can be configured as FAST 

(RAID0 Striping), SAFE (RAID1 

Mirroring), JBOD* (Just a Bunch 

Of Disks or individual drive), BIG 

(combined single volume), SAFE 

FAST (RAID 1+0 Mirror Stripped).

RAID setting via software utility 

under Windows, Mac OS or Linux .

OS independent, can be used on 

any system when all drives are 

configured as a single RAID 

volume.

RAID diagnostic software utility (for 

Windows, Mac and Linux).

Connect to system via USB 2.0 or 

eSATA port (connecting cables 

included).

Install up to four 3.5" SATA hard 

drives of any capacity (drives not 

included).

Drives are installed onto drive 

enclosures that can be added or 

removed like tape cartridge from 

each drive bay.

Drives can be configured as 

FAST2 (2 drive RAID 0 Striping),, 

SAFE2 (RAID1 Mirroring), SAFE 

FAST (RAID 1+0 Mirrored 

Stripped), BIG 2 (2 drives 

Concatenation), FAST4 (4 drive 

RAID 0 Striping), BIG 4(4 drives 

Concatenation), RAID 1+0, RAID 5 

over 4 drives, or RAID 5+S.

RAID setting via a rotary switch on 

the back.

OS independent, can be used on 

any system.

RAID diagnostic via LED lights.

Can install 3.5" IDE hard drive 

using optional Diamond IDE drive 

enclosure. 2.5" SATA or IDE hard 

drives can also be install with 

optional bracket and connector 

adapter.

Connect to system via USB 2.0 or 

eSATA port (connecting cables 

included).

Install up to four 3.5" SATA hard 

drives of any capacity (drives not 

included).

Drives are added or removed like 

tape cartridge from each drive bay 

with no special tool required.

Drives can be configured as 

FAST2 (2 drive RAID 0 Striping),, 

SAFE2 (RAID1 Mirroring), SAFE 

FAST (RAID 1+0 Mirrored 

Stripped), BIG 2 (2 drives 

Concatenation), FAST4 (4 drive 

RAID 0 Striping), BIG 4(4 drives 

Concatenation), RAID 1+0, RAID 5 

over 4 drives, or RAID 5+S.

RAID setting via a rotary switch on 

the back.

OS independent, can be used on 

any system.

RAID diagnostic via LED lights.

 

RAID TOWER IV BASIC SPECIFICATIONS