Nokia 6020b Service Manual
Issue 1 03/2005
COMPANY CONFIDENTIAL
61
Copyright © 2005 Nokia. All Rights Reserved.
RM-31
Appendix 7A
Appendix 7A
Nokia Customer Care
MCU-SW
There is no difference in the MCU-SW. The SW supports basically all bands. The definition if
the phone is a 850 or a 900 MHz phone is done in production and decides if the phone is a 850
or 900 MHz phone during boot up.
the phone is a 850 or a 900 MHz phone is done in production and decides if the phone is a 850
or 900 MHz phone during boot up.
MCU flashing will not influence this setting in the flash and therefore will not have any influence
on this.
on this.
PP Flags (variant specific settings) are set in production as well (label place). Those variant
specific settings are set after the MCU flashing and are dependent on the chosen product var-
iant.
specific settings are set after the MCU flashing and are dependent on the chosen product var-
iant.
Note: Please ensure that the proper product code is chosen before flashing.
■
Tuning
Since the tuning is band specific, please refer to the corresponding chapters in the Service
Manual. The tuning data is also in the classified flash area and when the phone is re-flashed
this data is not influenced at all.
Manual. The tuning data is also in the classified flash area and when the phone is re-flashed
this data is not influenced at all.