Nokia 6021 Service Manual
Issue 1 04/2005
COMPANY CONFIDENTIAL
9
Copyright © 2005 Nokia. All Rights Reserved.
RM-94
5 - Disassembly/Reassembly Instructions
Nokia Customer Care
Note: It is not possible to disassemble the power actuator without damaging it. The power actu-
ator is the same material as B-cover.
ator is the same material as B-cover.
Note: If a new B-cover is used, a torque setting of 28Ncm and speed in the range of 400 - 600
rpm is required to cut the new thread.
rpm is required to cut the new thread.
Caution: The display connector is fragile. Movement of the display module/UI shield assembly
can damage the solder joints of connector on the display module or phone PWB. Ensure it is
held in place during unscrewing and screwing.
can damage the solder joints of connector on the display module or phone PWB. Ensure it is
held in place during unscrewing and screwing.
Reassembly
Reassembly should be in reverse order to disassembly unless otherwise stated.