Nokia 6360 Service Manual
PAMS Technical Documentation 9. Troubleshooting
NPW-2NX
,VVXH
1RNLD&RUSRUDWLRQ
3DJH
C106
"The Phone has not received Secondary code bytes correctly."
Mbus from Prommer->UEM-
>UPP(MbusRx)
>UPP(MbusRx)
FbusRx from Prommer->UEM->UPP
FbusTx from UPP->UEM->Prommer
FbusTx from UPP->UEM->Prommer
C107
"The Phone MCU can not start Secondary code correctly."
UPP
C586
"The erasing status response from the Phone informs about
fail."
fail."
Flash
C686
"The programming status response from the Phone informs
about fail."
about fail."
Flash
Cx81
"The Prommer has detected a checksum error in the message,
which it has received from the Phone."
which it has received from the Phone."
FbusTx from UPP->UEM->Prommer
Cx82
"The Prommer has detected a wrong ID byte in the message,
which it has received from the Phone."
which it has received from the Phone."
FbusTx from UPP->UEM->Prommer
A204
Cx83
Cx84
Cx85
"The flash manufacturer and device IDs in the existing Algo-
rithm files do not match with the IDs received from the target
phone."
phone."
"The Prommer has not received Phone acknowledge to the
message."
message."
"The Phone has generated NAK signal during data block trans-
fer."
fer."
"Data block handling timeout"
Flash
UPP
VIO/VANA?
Signals between UPP-Flash
Mbus from Prommer->UEM-
>UPP(MbusRx)
FbusRx from Prommer->UEM->UPP
FbusTx from UPP->UEM->Prommer
VIO/VANA?
Signals between UPP-Flash
Mbus from Prommer->UEM-
>UPP(MbusRx)
FbusRx from Prommer->UEM->UPP
FbusTx from UPP->UEM->Prommer
Cx87
"Wrong MCU ID."
RFClock
UPP(Vcore)
UPP(Vcore)
Startup
for
flashing
for
flashing
Required startup for flashing
Vflash1
VBatt
VBatt