Nokia 6340i Service Manual
CCS Technical Documentation
Assembly & Disassembly Instructions
RH-13
Issue 1 11/02
ãNokia Corporation
Page 13
4.
Remove screws
The estimated optimal torque for the all six screws is
22 Ncm and the speed of rotation
480 rpm. The unscrewing order for pre-production is in the reverse order to screwing;
55, 54, 53, 52, 51, and 50. The screwing order possibilities for testing purposes is limited
to six (3!=3x2x1=6).
to six (3!=3x2x1=6).
5.
Remove antenna
Wear gloves or rubber fingertips when handling the antenna.
6.
Remove D-cover assembly
The D-cover is correctly removed when the four side snap joints of the D-cover are
released from the A-cover. Use your fingernails or a screwdriver with a chisel point
between the A and D-covers at the middle of the snap joint area to do the operation.
released from the A-cover. Use your fingernails or a screwdriver with a chisel point
between the A and D-covers at the middle of the snap joint area to do the operation.
Note: Screwdriver must not hit the engine module or components on it during disas-
sembly. Be also careful not to scratch covers.
On the next page you can see the removal operations of the subassemblies and parts of