Nokia 6340i Service Manual
CCS Technical Documentation
Assembly & Disassembly Instructions
RH-13
Issue 1 11/02
ãNokia Corporation
Page 7
8.
Insert screws
The estimated torque according to the screw trial for the all six screws is
22 Ncm and
speed of rotation
480 rpm by using Torx+, 1.8x9 Deprag, automatic feeding 708U driver.
Screwing order for pre-production is 50, 51, 52, 53, 54, and 55. Screwing order possibili-
ties for testing purposes is limited to six (3!=3x2x1=6).
ties for testing purposes is limited to six (3!=3x2x1=6).
9.
Insert antenna-cover to RH-13 assembly
In step one, push the front end of the antenna cover downwards until it snaps from four
snap joints in it. Be careful not to break them. Step two shows how to click the two
lower and bigger snap joints last.
snap joints in it. Be careful not to break them. Step two shows how to click the two
lower and bigger snap joints last.