Nokia 9110 Service Manual
PAMS
Technical Documentation
RAE–2 series PDA Phone
Quick Guide
Page 12 – 18
Draft 01/99
Use only batteries, chargers, and accessories approved by the
communicator manufacturer for use with this particular communicator
model. The use of any other types will invalidate any approval or warranty
applying to the communicator, and may be dangerous.
communicator manufacturer for use with this particular communicator
model. The use of any other types will invalidate any approval or warranty
applying to the communicator, and may be dangerous.
Memory Card
The postage stamp sized Memory Card DTS–4 provides 4 MB of
removable storage for the communicator. The memory card increases the
available memory for data and software applications. For further
information, see chapter 3 “Special features” of the User’s manual.
removable storage for the communicator. The memory card increases the
available memory for data and software applications. For further
information, see chapter 3 “Special features” of the User’s manual.
Note: Keep all memory cards out of small children’s reach.
Headset
The Headset HDC–8 offers private headset audio operation. With the
remote control button, which is located in the microphone part of the
headset, you can answer and later end a call. The Headset connects
directly to the connector at the bottom of the communicator.
remote control button, which is located in the microphone part of the
headset, you can answer and later end a call. The Headset connects
directly to the connector at the bottom of the communicator.
Advanced Desktop Stand
The Advanced Desktop Stand DCH–7 enables charging of the battery of
the communicator, when the communicator is placed in the stand. The
advanced feature of the stand is the easy connection to a computer. The
stand also has a slot for charging batteries separately from the
communicator. This is especially convenient for charging spare batteries.
the communicator, when the communicator is placed in the stand. The
advanced feature of the stand is the easy connection to a computer. The
stand also has a slot for charging batteries separately from the
communicator. This is especially convenient for charging spare batteries.
To charge the communicator battery with the desktop stand
1 Plug the Performance Travel Charger into the stand.
2 Place the communicator in the desktop stand connector end first.
3 Plug the charger into a mains outlet.
To charge a spare battery with the desktop stand
1 Plug the Performance Travel Charger into the stand.
2 Insert the battery in the second slot the golden contacts first. Push the
battery slightly backwards. Ensure that the battery clicks into place.
battery slightly backwards. Ensure that the battery clicks into place.
3 Plug the charger into a mains outlet. Check that the light on the left of
the stand is on. The red light indicates charging, and the steady green
light indicates that the battery is charged.
the stand is on. The red light indicates charging, and the steady green
light indicates that the battery is charged.
4 To remove the battery, reverse the procedure
To connect to a PC
With the communicator in the desktop stand, you can connect to a PC
with the RS–232 adapter cable DLR–2.
with the RS–232 adapter cable DLR–2.
1 Plug the adapter cable into the connector at the back of the stand.