Nokia 702 User Manual

The device can automatically switch between the GSM 
and WCDMA networks. The GSM network is indicated 
with 

 in the standby mode. The WCDMA network is 

indicated with 

.

 (shown only if supported by the 

operator)—Select which network to use. If you select 

, the device uses the GSM or WCDMA network 

automatically, according to the network parameters and 
the roaming agreements between the network operators. 
Contact your network operator for more details.

—Select 

 to set the phone 

to search for and select one of the available networks, or 

 to manually select the network from a list of 

networks. If the connection to the manually selected 
network is lost, the phone sounds an error tone and asks 
you to reselect a network. The selected network must have 
a roaming agreement with your home network, that is, the 
operator whose SIM card is in the device.

Glossary: A roaming agreement is an agreement 
between two or more network service providers 
to enable the users of one service provider to use 
the services of other service providers.

—Select 

 to set the device to indicate 

when it is used in a cellular network based on microcellular 
network (MCN) technology and to activate cell info 
reception.

Indicators shown in the standby mode:
 

A headset is connected. 

 

A loopset is connected.

 

A car kit with Bluetooth technology is connected.

 

The headset is unavailable, or a Bluetooth connection 

to a headset is lost.

Select 

, 

, or 

, and the 

following options are available:

—To set the profile that you want activated 

each time you connect a certain enhancement to the 
device. See "Set tones" on page 23. 

—To set the phone to answer an 

incoming call automatically after 5 seconds. If the Ringing 
type is set to 

 or 

, automatic answer is 

disabled.