Nokia 7270 Service Manual
Issue 2 03/2005
COMPANY CONFIDENTIAL
10
Copyright © 2005 Nokia. All Rights Reserved.
RM-8/RM-47/RM-48
Nokia Customer Care
Table 1: Most common error messages
Error
Description
Used signals/components
Points to Check
C101
The Phone does not
set Flashbus TXD
line high after the
startup.
VBAT, VCORE, VIO, VFLASH1
BSI and FBUSRX from Prommer to UEMEK
FBUSTX from TIKU->UEMEK->Prommer (stuck at ‘0’)
SLEEPX from UEMEK to TIKU
VBAT at C2228
VCORE at C2222,
VIO at C3003
VFLASH1 at R2204
BSI pulse at C2003 when flashing starts
FBUSRX at R3403
FBUSTX state at J2812(TIKU)-
>R3400(UEMEK)
SLEEPX at J2801
C102
The Phone does not
set Flashbus TXD
line low after the line
has been high. The
Prommer generates
this error also when
the Phone is not
connected to the
Prommer.
PURX, VR3
RFCLOCK (VCTCX->Helgo->TIKU)
MBUS From Prommer->UEMEK->TIKU(stuck at ‘1’)
FBUSTX from TIKU->UEMEK->Prommer(stuck at ‘1’)
PURX state transition ‘0’ to ‘1’ at J2802
VR3 at C2227 and C7526
RFCLOCK at G7501 and R2901
MBUS pulse train at R3405
FBUSTX state at J2812(TIKU)-
>R3400(UEMEK)
C103
The Phone MCU
has not received the
first dummy word
correctly from the
Prommer after the
startup.
MBUS from Prommer->UEMEK->TIKU(stuck at ‘0’)
FBUSRX from Prommer->UEMEK->TIKU
FBUSTX from TIKU->UEMEK->Prommer
MBUS pulse train at R3405
FBUSRX serial data at R3403
FBUSTX state at J2812(TIKU)-
>R3400(UEMEK)
C107
The Phone MCU
can not start
Secondary code
correctly.
TIKU
A204
The flash
manufacturer and
device IDs in the
existing Algorithm
files do not match
files do not match
with the IDs
received from the
target phone.
Flash
Signals between TIKU and Flash
Prommer SW
A387
The MCU ID in the
FIASCO_MCU_ID_I
NFO block of the
MCUSW file does
not match with the
ID received from the
target phone.
TIKU Prommer
SW
C583
C683
C683
The Prommer has
not received Phone
acknowledge to the
acknowledge to the
message.
Flash and TIKU
Signals between TIKU and Flash
C584
C684
C684
The Phone has
generated NAK
generated NAK
signal during data
block transfer.
Flash and TIKU
Signals between TIKU and Flash
C585
C685
C685
The Phone has not
acknowledged data
block correctly.
Flash and TIKU
Signals between TIKU and Flash
C586
C686
C686
The erasing status
response from the
Phone informs about
fail.
Flash