Nokia BH-214 User Manual

device to also play music through the 
headset.

If your mobile device does not support 
the A2DP profile, you can separately 
pair the headset with the mobile 
device and a music player that 
supports this profile. If you have 
paired and connected the headset 
with your mobile device, disconnect 
the headset from it before pairing the 
headset with the music player.

1. Ensure that your mobile device or 

music player is switched on and 
the headset is off.

2. Press and hold the power key (for 

about 5 seconds) until the blue 
indicator light starts to flash 
quickly.

3. Within about 3 minutes, activate 

the Bluetooth feature on your 
device, and set it to search for 
Bluetooth devices.

4. Select the headset from the list of 

found devices.

5. If necessary, enter the passcode 

0000 to pair and connect the 
headset to your device. If your 
device does not have a keypad, it 
may use this passcode by default.

In some devices, you may need to 

make the connection separately 
after pairing.

When the headset is connected to 
your device and is ready for use, the 
blue indicator light flashes slowly.

You can pair the headset with up to 
eight devices but connect it to only 
one device supporting the HFP profile 
and another device supporting the 
A2DP profile at a time.

To manually connect the headset to 
the last used device that supports the 
HFP profile (for example, after 
connection loss), switch the headset 
off and on, or press and hold the