Panasonic cn-dv1800en User Manual

Check that the mobile navigation system is properly wired to the vehicle.

Press SET UP to open the [Setup
Menu].
On the [Setup Menu], select [System
Information] by moving the joystick,
and press ENTER.

On the [Setup Menu - System
Information] menu, select [Wiring
Check], and press ENTER.

a Check the wiring information.

Perform the following operations and
confirm that the 4 lights on the car illus-
tration are turned on.

Select [End], and press ENTER.
Press POS to return to the map display.

• Turn on the sidelights

a   [Side Light] lamp on

• Pull the side brake

a   [Hand Brake] lamp on

• Pull the side brake and shift into reverse (R)

a   [Reverse Light] lamp on

• [GPS] lamp on

The [Wiring Check Information] menu also contains the following
information:

• Speed:

Shows the vehicle speed.

• ACC Volt:

Shows the voltage of the car battery (11 V to 16 V).

• Speed Pulse:

Shows the speed pulse emitted by the vehicle.

• Accuracy level: Shows the learning level of vehicle positioning accuracy.