Panasonic cn-dv1800en User Manual

ENGLISH

a) Press SET UP to open the [Setup Menu].
b) Select [System Setup] using the joystick, and press

ENTER.

c) Scroll down the screen until the next page comes using the

joystick.

d) After 2nd page appears, select [Map Area] using the joy-

stick, and press ENTER.

e) The area list appears. Then, select an area, and press

ENTER.

MRE (Major Roads of Europe)

A route can be set from the current position to other country using Major Roads.

Major Roads of Europe:
Major Roads of Europe are selected by NAVTECH based on the volume of traf-
fic, the importance at local, the connection to major city, and other information.
Please understand some of the motorways are not provided.

Press DEST to display the Select Destination screen.

Select [Point of Interest] using the joystick, and press
ENTER.

Select [CITY CENTRE] using the joystick, and press
ENTER, then select the [NAME] using the joistick,
and press ENTER.

Select a city center which is the nearest to the desti-
nation from among the displayed list.

Select a favorite method of route calculation from the
confirm screen.

Follow the guidance. Then, change the displayed map
to a map of the current country version after arriving
at or approaching the set city center.

Important Note:

Only major roads and their accompanying roads are displayed in the map while using MRE.
Therefore, the following method is recommended to set the destination.
When setting a destination in Continental Europe from the UK only, please follow these steps (this is
necessary because the Mainland UK map does not contain MRE information):
1. Change the map area to the map area of the destination country (follow parts a to e in step 6

below).

2. Set the vehicle position to where you will join the nearest Motorway (see page 54 for details).
3. Follow the steps below, except steps 6 and 7.
4. When you near the city that was set, please set the final destination by the ordinary method.

DEST

ENTER