Panasonic 8035 User Manual

Page of 196
168
Setting Your Machine
No.
Parameter
Setting
Comments
000
Print Fax Parameter List
Stop
Prints the Fax Parameter List.
Start
001
Contrast (HOME)
1 (Lightest)
Setting the home position for the CONTRAST.
——
4 (Normal)
——
7 (Darkest)
002
Resolution (HOME)
STD
Setting the home position for the RESOLUTION.
Fine
S-Fine
003
Original (HOME)
Text
Setting the home position for the ORIGINAL.
Txt/Pht
Photo
004
Stamp (HOME)
Off
Setting the home position for the STAMP.
On
To select the stamp function when document is stored in memory, see Fax
Parameter No. 028 (Stamp At Memory XMT).
005
Memory (HOME)
Off
Setting the home position for the MEMORY.
On
006
Dialing Method
Tone
Selecting the dialing method.
Pulse
007
Header Print
Inside
Selecting the printing position of the header.
Outside
Inside
: Inside TX copy area.
No Print
Outside : Outside TX copy area.
No Print : Header is not printed.
008
Header Format
Logo, ID
Selecting the header format.
From To
009
RCV’D Time Print
Invalid
Selecting whether the machine prints the received date & time, remote ID,
Valid
percentage of reduction and page number on the bottom of each received
document.
012
Comm. Journal (HOME)
Off
Selecting the home position of printout mode for COMM. Journal Off/Always/
Always
Inc Only.
Inc Only
Off
: Does not print
Always
: Always prints
Inc Only : Prints only when communication has failed.
013
Auto JRNL Print
Invalid
Selecting whether the machine prints the journal automatically after every
Valid
200 transactions.
014
File Accept Report
Invalid
Selecting whether the machine prints the file acceptance journal.
Valid
If you set this parameter to valid, a journal will be printed after any memory
communication.
017
Receive Mode
Manual
Setting the reception mode to automatic or manual.
Auto
(Below table are including G3 Facsimile function parameters.)
Fax Parameter Table
No.
Parameter
Setting
Comments