Panasonic 8025 User Manual

64

■

■

■

■

■ Job Memory

Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.

M1, M2, M3, M4, M5

Set up the copy job
to be stored.

NOTE

● JOB MEMORY mode will not be deleted even if the power switches are turned Off.

● When storing a new job into a programmed memory location, the previously stored job will be

overwritten and erased.

● M1, M2 can use as manual skyshot mode by setting the user function mode.

■

■

■

■

■ Double Exposure

From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image). ∗

1

• Front Side of Original
• Original Size:

Free, maximum Invoice size

• Opening the ADF
• Fit original to the Original

Guide.

Back Side
of Original

When opening the Platen Cover, or ADF

● An incorrect position detection of the

original may occur when a strong light
shines on the glass during this mode.

● An incorrect exposure may occur when

there is a Black line at the edge of the
original, or an image which the machine
interprets as a Black Pattern in this mode.

● The final copy may be affected if colored

background original(s) do not have a
White edge, or if it is less than 2 mm wide.

∗

1 When selecting the Double Exposure,  it

will be displayed as  "2 in 1" at  Job
Settings, and "N in 1" of Function Select
Key will also be displayed.

∗

2 Double Exposure function set by M5 key is

unable to store with other Job Memory.

Original Size:

ABC

ABC

DEF

NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to "Off" in the
Copier Settings "16 Double Exposure". (See
page 75)

Original Guide

∗

2

Front Side
Image

Back Side
Image

Copy Size: Letter-R

Ex: Invoice-R