Panasonic 26hl57 User Manual
29
HL57 (E/F) Web 213:276
Chapter 5: Setting up your TV
Setting the HDMI
™
audio mode
To set the HDMI audio mode:
1
Press Y and open the Set Up menu.
2
Highlight AV Connection and press T.
3
Press B or b to select HDMI1 Audio, and then press C
or c to select the HDMI audio mode (Auto, Digital, or
Analog). (Auto is the recommended mode). See
“Connecting an HDMI or DVI device to the HDMI input”
(- page 15).
or c to select the HDMI audio mode (Auto, Digital, or
Analog). (Auto is the recommended mode). See
“Connecting an HDMI or DVI device to the HDMI input”
(- page 15).
Note: Because the PC and HDMI1 inputs share the same set
of analog audio inputs, the PC/HDMI1 Audio setting
influences the HDMI1 Audio setting. If PC/HDMI1 Audio is set
to HDMI1, the HDMI1 Audio setting changes to Auto. If PC/
HDMI1 Audio is set to PC, the HDMI1 Audio setting is set to
Digital and will be grayed out.
of analog audio inputs, the PC/HDMI1 Audio setting
influences the HDMI1 Audio setting. If PC/HDMI1 Audio is set
to HDMI1, the HDMI1 Audio setting changes to Auto. If PC/
HDMI1 Audio is set to PC, the HDMI1 Audio setting is set to
Digital and will be grayed out.
When the sound is not audible:
If no sound comes out while receiving HDMI signal, the sound
may be audible when using the Lip Sync Latency feature set to
off.
may be audible when using the Lip Sync Latency feature set to
off.
1
Press Y and open the Set Up menu.
2
Highlight AV Connection and press T.
3
Press B or b to highlight HDMI1 Audio.
4
Press and hold T for 5 seconds until the Lip Sync
Latency menu appears on the screen.
Latency menu appears on the screen.
5
Press C or c to select Off.
6
Press p to turn the TV off and on again.
Note: Depending on the connected HDMI device, the sound
may be audible by turning it off and on again.
may be audible by turning it off and on again.
MENU
Back
Exit
EXIT
PC/HDMI1 Audio
HDMI1 Audio
AV Connection
HDMI1
Auto
Lip Sync Latency
On
26323742HL57_EN.book Page 29 Wednesday, March 14, 2007 4:28 PM