Panasonic AJ- G User Manual

Page of 36
E-21
Saving/Loading of scene files onto the SD memory card
It is possible to store up to 8 sets of settings for 
the unit.
While data on the card are read or written, any 
operation of the unit panel is inhibited. Insert the 
SD memory card into the SD memory card slot 
on the unit and operate the unit menu.
<Notes>
z Use an SD memory card with a capacity of 8 
MB or more. The maximum capacity of an SD 
card that can be used on the unit is 2 GB.
z The SD memory card must be formatted on 
the unit.
Handling methods for the SD 
memory card
Ensure that the SD memory card is inserted or 
ejected in the proper direction.
When the SD memory card is used for the first 
time, execute CARD CONFIG in SYSTEM on the 
unit menu.
<Note>
While data are being stored on the SD memory 
card or data are being loaded from the SD 
memory card, do not remove the SD memory 
card. Otherwise, data on the SD memory card 
may be damaged.
To load data from the card
1
When “SYSTEM” is selected using the 
SHUTTER/SYSTEM button, the indication 
“CARD-RD” is displayed on the LCD panel 
together with the value displayed under the 
indication and the title next to the indication.
2
Select the file to read out by changing the 
numerical value in the Rotary Encoder 1.
If there is no applicable file, the indication 
“NO FILE” is displayed on the LCD panel.
3
Press the Rotary Encoder 3.
When the indication “READ NO?” is 
displayed on the LCD panel, turn the Rotary 
Encoder 3 to select “YES?” and press the 
Rotary Encoder 3 again to start reading out 
the data.
4
The read operation starts and the indication 
“ACTIVE” is displayed on the LCD panel.
While the data are loaded, the SD memory 
card access lamp is on.
5
When the reading the data is finished, the 
SD memory card access lamp turns off and 
the indication “OK” is displayed on the LCD 
panel.
<Note>
If the data cannot be read properly, the 
indication “READ NG” is displayed on the 
LCD panel. Execute the load operation 
again. If the load operation is not executed 
properly, replace the SD memory card with a 
new one.
SD memory card 
slot
SD memory card 
access lamp
AJ-RC10G.book  21 ページ  2006年7月26日 水曜日 午前9時25分