Panasonic ag-vp300 User Manual
29
VC
R
Settings Using the On Screen Display (continued)
Channel Set
The unit tunes automatically after you plug it in and turn it on for
the first time (Plug in Auto Tuning
the first time (Plug in Auto Tuning
lpage 15), but you can start the
process again if necessary.
Preparations
≥Select any program position except “A1” or “A2”.
≥Select any program position except “A1” or “A2”.
Operations
While the VCR MENU is displayed
1
Select “CHANNEL SET” by pressing [Cursor]
34
and then press [ENTER].
ª ANTENNA SYSTEM
2
2
Select “ANTENNA
SYSTEM” by pressing
[Cursor]
SYSTEM” by pressing
[Cursor]
34 and then
press [ENTER].
3
Press [Cursor]
34 to
select “TV” or “CATV” to
suit the type of antenna
you are using.
suit the type of antenna
you are using.
≥Channels set corresponding
to the antenna system you
select.
This is set automatically
when you do Plug in Auto
Tuning.
select.
This is set automatically
when you do Plug in Auto
Tuning.
To exit the on screen display
Press [MENU] three times .
Press [MENU] three times .
ª Auto Tuning
Auto tuning searches for TV stations from VHF minimum to UHF
maximum and memorizes every tuned program position. Other
program positions are skipped. (Channel plan
maximum and memorizes every tuned program position. Other
program positions are skipped. (Channel plan
lright)
2
Select “AUTO” by
pressing [Cursor]
pressing [Cursor]
34
and then press [ENTER].
Auto tuning starts. It may take
up to three or more minutes to
complete.
up to three or more minutes to
complete.
To stop partway through
Press [MENU].
Press [MENU].
Notes:
≥When Auto Tuning is completed, the on screen display
≥When Auto Tuning is completed, the on screen display
disappears and the lowest channel position at which a broadcast
can be tuned in is received.
can be tuned in is received.
≥If you have not set the clock, the unit will carry out Auto Clock
Setting. The time is displayed on the unit’s display when finished.
≥If the unit is not correctly tuned by Auto Tuning, follow the
procedure on the right column.
ª Manual Tuning
2
Select “MANUAL” by pressing [Cursor]
34 and
then press [ENTER].
3
Press [Cursor]
34 to
select “CH” and
[Cursor]
[Cursor]
2 1 to select the
channel.
4
Press [Cursor]
34 to
select “BLANK” and
[Cursor]
[Cursor]
2 1 to select
“ON” or “OFF”.
≥To select the blanking of a program position, select “ON”.
≥To restore the channel again, select “OFF”.
≥Repeat steps 3 and 4 for another unoccupied program
≥To restore the channel again, select “OFF”.
≥Repeat steps 3 and 4 for another unoccupied program
positions to skip during the selection of the program
positions.
positions.
To exit the settings screen
Press [MENU] three times.
Press [MENU] three times.
Channel plan
TV mode
CATV mode
SELECT
END
END
:
:MENU
:MENU
CATV
ANTENNA SYSTEM
≥TV
SELECT
END
END
: , ENTER
:MENU
:MENU
CHANNEL SET
≥ANTENNA SYSTEM
AUTO
MANUAL
MANUAL
END :MENU
AUTO CHANNEL SET
PROCEEDING
PROCEEDING
2
CHANNEL
DESIGNATIONS
CHANNEL
RECEIVED OF
THE AIR
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
VHF
2–13
2–13
UHF
14–69
14–69
CHANNEL
DESIGNATIONS
CHANNEL
RECEIVED
FROM CABLE
CHANNEL
SELECTION &
INDICATION
ON THE UNIT
BROADCAST
VHF
2–13
2–13
CATV LOW
BAND
A-5–A-1
95–99
CATV MID/
SUPER
BANDS
A–W
14–36
CATV HYPER
BAND
AA–EEE
37–65
ULTRA
BAND
GGG–WWW
WWW
i1–
WWW
i12
66–94
100–125
100–125
SPECIAL CATV
CHANNEL
5A
1
CH 2
MANUAL CHANNEL SET
VP300P.book Page 29 Thursday, March 20, 2003 10:21 AM