Panasonic ag-tl750 User Manual
37
6-3 Timer Recording
Notes on Timer Recording
5
If you make a mistake when programming or no
programme is set and the [TIMER] button is pressed,
the TIMER indication blinks for about 10 seconds and a
warning buzzer sounds if <ERR WARN> in the
<BUZZER> menu is set to “ON”.
programme is set and the [TIMER] button is pressed,
the TIMER indication blinks for about 10 seconds and a
warning buzzer sounds if <ERR WARN> in the
<BUZZER> menu is set to “ON”.
=
Perform programming for timer recording.
* Note that if the date is not set for holiday timer
* Note that if the date is not set for holiday timer
recording, the TIMER indication will not blink, the time
standby mode is not engaged, and recording will not
take place.
standby mode is not engaged, and recording will not
take place.
5
If programmed data overlap
When the [TIMER] button is pressed, the Timer-
Recording Standby mode is engaged and the
[OVERLAP] indication blinks for about 10 seconds, then
lights.
(However, if programme timer settings and holiday timer
settings overlap, the [OVERLAP] indication is not
shown. In this case, the holiday timer setting has
priority. The [OVERLAP] indication is not shown when a
daily timer recording programme overlaps with another
programme (even during programme timer setting). The
programme with the earlier start time has priority.)
When the [TIMER] button is pressed, the Timer-
Recording Standby mode is engaged and the
[OVERLAP] indication blinks for about 10 seconds, then
lights.
(However, if programme timer settings and holiday timer
settings overlap, the [OVERLAP] indication is not
shown. In this case, the holiday timer setting has
priority. The [OVERLAP] indication is not shown when a
daily timer recording programme overlaps with another
programme (even during programme timer setting). The
programme with the earlier start time has priority.)
=
Check the programme contents.
(With programme timer settings, the programme with the
earlier programme time has priority.)
(With programme timer settings, the programme with the
earlier programme time has priority.)
5
When more than one timer recording is programmed:
=
• The preset programme are executed consecutively
beginning with the programme with the earliest start
time. The number of the programme being executed
blinks.
time. The number of the programme being executed
blinks.
* programme numbers are not displayed for holiday
timer recording programmes.
5
When the timer recording mode is engaged after the
start time has passed:
When a power failure occurs within the set times and
power is restored:
start time has passed:
When a power failure occurs within the set times and
power is restored:
=
• Timer recording starts within the set times.
* If holiday timer and programme timer settings overlap,
* If holiday timer and programme timer settings overlap,
the holiday timer setting has priority and starts.
* When programme timer settings overlap, the
programme with the lower programme number has
priority and starts.
priority and starts.
5
When the timer recording settings are changed during
timer recording:
timer recording:
=
Changing the settings on the programme timer setting
screen or holiday timer setting screen during timer
recording will have no effect. To change the settings,
you must disengage the timer recording mode.
screen or holiday timer setting screen during timer
recording will have no effect. To change the settings,
you must disengage the timer recording mode.
6 RECORDING
5
During timer recording
The [PAUSE/STILL] or [STOP] button has no effect.
The [PAUSE/STILL] or [STOP] button has no effect.
=
Operation after pressing the [TIMER] button.
5
Timer recording
The operating mode is turned on about 20 seconds
before recording starts and the VCR pauses. Recording
starts about 2 seconds before the actual programmed
start time.
The operating mode is turned on about 20 seconds
before recording starts and the VCR pauses. Recording
starts about 2 seconds before the actual programmed
start time.
5
If no cassette is loaded
The TIMER and [
The TIMER and [
] indications blink and a warning
buzzer sounds if <ERR WARN> in the <BUZZER>
menu is set to “ON”.
menu is set to “ON”.
=
Load a cassette with safety tab. Cassettes with no tab
are ejected.
are ejected.
5
When the tape ends during timer recording:
=
The cassette tape is ejected.
When a cassette with safety tab is loaded, the timer
recording re-starts.
When a cassette with safety tab is loaded, the timer
recording re-starts.
* However, if timer recording is executed in the Repeat
Record mode, the cassette tape is not ejected at the
tape end and repeat recording continues.
tape end and repeat recording continues.
5
When the recording speed of programme timer or
holiday timer is set as L12/L24.
The cassette is ejected when a VHS cassette is loaded
and the [TIMER] button is pressed.
holiday timer is set as L12/L24.
The cassette is ejected when a VHS cassette is loaded
and the [TIMER] button is pressed.
=
• Insert an S-VHS cassette, or switch to a recording
speed other than L12/L24.