Panasonic AJ-RC5 User Manual

J CALL button

This button is used to call the camera.
When the camera is called, the button’s
LED comes on.

K R TALLY indicator 

This indicates the R TALLY signal which
is input from the TALLY IN connector of
the base station.

L G TALLY indicator

This indicates the G TALLY signal which
is input from the TALLY IN connector of
the base station.

J

L

M

R

N

K

O

P

Q

S

T

N AUTO IRIS indicator

This comes on when the IRIS switch M is set to AUTO.

M IRIS switch

This is the iris selector switch.  Either AUTO or MANUAL is selected.

This comes on when the GAIN value appears on the numerical display LED.

S

O EXTENDER indicator

This comes on when the extender (a2) of the camera lens is used.

P CHECK button

By pressing this button in succession, the GAIN indicator S

> FILTER indicator R >

GAMMA indicator T come on in this order, and the GAIN value, FILTER position and master
GAMMA value are displayed respectively on the numerical display LED.

Q Numerical display LED

This indicates the f-value of the lens.  When the GAIN, FILTER or GAMMA setting is changed,
it displays the corresponding value.  When the CHECK button P is pressed in succession, the
f-value, GAIN value, FILTER position, master GAMMA value and f-value are displayed
respectively.

“ - - - ” appears on the LED when the power to the camera main unit is off or when the base
station front panel operations are effective (refer to the AJ-BS900H Operating Instructions).

R FILTER indicator

This comes on when the FILTER position appears on the numerical display LED.

T GAMMA indicator

This comes on when the master GAMMA value appears on the numerical display LED.