Panasonic AJ-HD150 User Manual
– 67 –
USER menu
<VIDEO>
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
600
VIDEO IN
0000
INT SG
SEL
0001
SDI
0002
SDTI
601
VIDEO INT
0000
OCB
SG
0001
MB
0002
RAMP
0003
BLACK
602
SDI IN
0000
DR OFF
MODE
0001
DR ON
603
V-MUTE
0000
N-MUTE
SEL
0001
GRAY
0002
BLACK
0003
NOISE
604
FREEZE
0000
FIELD
SEL
0001
FRAME
605
INTERPOLATE
0000
OFF
0001
AUTO
620
DOWNCON
0000
FIT_V
MODE
0001
FIT_H
0002
FIT_HV
0003
14:9
0004
13:9
621
UPCON
0000
FIT_V
MODE
0001
FIT_H
0002
FIT_HV
0003
14:9
0004
13:9
622
DC RESP
0000
WIDE
HV
0001
STAND
0002
NARROW
623
UC RESP
0000
WIDE
HV
0001
STAND
0002
NARROW
The underline on the setting item denotes the initial setting.
This selects the video signals to be input.
0: The internal signals selected by the VIDEO INT SG menu
0: The internal signals selected by the VIDEO INT SG menu
item are generated.
1: The serial video signals supplied to the HD SDI IN
connector are selected.
2: The compressed IF signals supplied to the SDTI IN
connector are selected.
This selects the type of internal signals.
0: The color bar signal is selected.
1: The multi burst signal is selected.
2: The ramp signal is selected.
3: The black signal is selected.
0: The color bar signal is selected.
1: The multi burst signal is selected.
2: The ramp signal is selected.
3: The black signal is selected.
This selects the HD SDI input processing method.
0: After the lower 2 bits have been rounded off (rounded up
0: After the lower 2 bits have been rounded off (rounded up
for 5 or above, rounded down for 4 or below), the higher 8
bits are recorded.
bits are recorded.
1: The 8-bit signals which have been dynamically rounded are
recorded.
This selects whether to mute the video output signals when
LOW RF has been detected during playback.
0: The signals are not muted. (They are frozen.)
1: They are muted with gray.
2: They are muted with black.
3: They are muted with noise.
LOW RF has been detected during playback.
0: The signals are not muted. (They are frozen.)
1: They are muted with gray.
2: They are muted with black.
3: They are muted with noise.
This selects the freeze status for still pictures.
0: Field freeze
1: Frame freeze
0: Field freeze
1: Frame freeze
Vertical interpolation is automatically conducted during slow
playback to reduce the vertical movement of the playback
pictures, but this setting enables the interpolation to be forcibly
turned off.
0: Interpolation is forcibly turned off.
1: Interpolation is automatically turned on during slow
playback to reduce the vertical movement of the playback
pictures, but this setting enables the interpolation to be forcibly
turned off.
0: Interpolation is forcibly turned off.
1: Interpolation is automatically turned on during slow
playback.
This selects the screen during down-conversion.
0: Side cut mode
1: Letterbox mode
2: Squeeze mode
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
0: Side cut mode
1: Letterbox mode
2: Squeeze mode
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
This selects the screen during up-conversion.
0: Side panel mode
1: Top and bottom in vertical direction cut off
2: Stretch mode
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
0: Side panel mode
1: Top and bottom in vertical direction cut off
2: Stretch mode
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
This selects the horizontal and vertical frequency band during
down-conversion.
down-conversion.
This selects the horizontal and vertical frequency band during
up-conversion.
up-conversion.
<Note>
Setup menu items
No.620 to No.623 do
not work if the AJ-
UDC150P optional
board has not been
Setup menu items
No.620 to No.623 do
not work if the AJ-
UDC150P optional
board has not been
installed.
Setup menus