Panasonic BB-HCM331A User Manual
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Operating Instructions
57
[For assistance, please call: 1-800-272-7033]
•
Set up the IPsec policy as the following.
9.
Access the camera (see page 12).
•
If you can access the camera, the IPsec setup is complete.
Notes
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
Single Camera page.
•
If you cannot communicate using IPsec, see 2.9 IPsec in the
Troubleshooting section of the Installation/Troubleshooting.
Troubleshooting section of the Installation/Troubleshooting.
•
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec
features.
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec
features.
Phase 2
Mode
Quick mode
PFS
Specifies either of Off, D-H Group 1 or D-
H Group 2.
H Group 2.
Cipher Algorithm
Select from DES-CBC, 3DES-CBC,
AES-CBC (128, 192, 256 bits) or NULL.
(Multiple selections are available.)
AES-CBC (128, 192, 256 bits) or NULL.
(Multiple selections are available.)
Message-Digest
Algorithm
Algorithm
HMAC-MD5-96, HMAC-SHA-1-96
Lifetime
Specifies by 28800 s (Byte setting is not
supported.)
supported.)
*1
The camera does not support aggressive mode.
Items
Settings
Protocol
ANY
Source Network
Network address and subnet mask on the LAN side of the
VPN router
VPN router
Source IP address
A global address on the WAN side of the VPN router
Destination Network
A global address of the camera
Destination IP address
A global address of the camera
IKE Items
Settings