Panasonic cf-71djxxxxx User Manual
29
Run the Setup Utility
1
Using USB Devices
2
3
Using and , select [Power Management], then press
Enter
Enter
4
5
Using and , select [Power Saving], set [OFF] with
Close the Setup Utility
6
Using and , select [Sleep Switch], set [No Action] with
Using and , select [Fn+F7/Fn+F10], set [Disable] with
, then press Esc
Install the Windows 95 USB device drivers
7
1
In [Start] - [Run], input [c:\util\msupdate\usbsupp.exe]*, then press [OK].
At the confirmation message, press [Yes].
*
At the confirmation message, press [Yes].
*
After reinstalling the hard disk, set the Windows 95 CD-ROM included in the Win-
dows 95 System Pack and input [L:\other\updates\usb\usbsupp.exe].
dows 95 System Pack and input [L:\other\updates\usb\usbsupp.exe].
2
Read the [END-USER LICENSING AGREEMENT] and press [Yes] or [No].
• Installation will start if [Yes] is pressed. A message will appear asking whether
• Installation will start if [Yes] is pressed. A message will appear asking whether
to restart the computer; press [OK].
• Installation will be aborted if [No] is pressed.
3
At the display indicating the completion of installation, press [OK]. The com-
puter will automatically restart.
puter will automatically restart.
4
In [Start] - [Run], input [c:\util\msupdate\usbupd2.exe]**, then press [OK].
**
**
After reinstalling the hard disk, set the Windows 95 CD-ROM included in the Win-
dows 95 System Pack and input [L:\other\updates\usb\usbupd2.exe].
dows 95 System Pack and input [L:\other\updates\usb\usbupd2.exe].
5
In [Start] - [Shut Down], select [Restar t], then press [OK].
6
In [Start] - [Run], input [c:\util\msupdate\usbcopy.bat], then press [Yes].
7
Click
at the upper right corner to close the display.
8
In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], select
[PCI Universal Serial Bus] in [Other devices], press [Remove], then press [OK].
[PCI Universal Serial Bus] in [Other devices], press [Remove], then press [OK].
9
Press [Refresh] and press [Close] at the [System Properties],
CAUTION
After a driver has been installed, do not use the suspend or hibernation func-
tion. If the suspend or hibernation mode is activated, the computer may not
function properly. Power off, then on, using the power switch to resume proper
operation.
If you want to use the suspend or hibernation function when the USB driver is
installed, disable the USB device function of the computer. (
tion. If the suspend or hibernation mode is activated, the computer may not
function properly. Power off, then on, using the power switch to resume proper
operation.
If you want to use the suspend or hibernation function when the USB driver is
installed, disable the USB device function of the computer. (
(To next page)