Panasonic AJ-SD255 User Manual

32

The underlined items indicates the initial setting.

MOJI : MOJI system

NABTS : NABTS system

Note:
Signals like VITC signals are often
mistakenly detected as teletext signals
when the NABTS system has been
selected.
If this happens, select MANU as the setting
for setup menu No. 803 (TELETEXT DET),
then select the line for teletext signals.

The teletext signals are not recorded.

The teletext signals are automatically
detected

The lines in which the teletext signals
are to be recorded are selected and set.

Notes:
• The number of lines in which the teletext

signals can be recorded differs depending
on the setup menu item No.660 (UMID
REC) setting. (See “Number of lines
which can be set for teletext”.)

• When  setting  “MANU” is selected and

the STOP button is pressed, operation
transfers to the sub-screen, and the
number of recording lines can be
selected. 

To return from the sub-screen, press the
STOP button again.

(For AJ-SD255E)

(For AJ-SD255P)

Blanking is effected forcibly for all
lines.

No blanking is effected for any of the
lines.

Blanking ON or OFF is selected for
each line.

Note:
When setting “MANU” is selected and the
STOP button is pressed, operation
transfers to the sub-screen, and ON or
OFF can be selected for each line. To
return from the sub-screen, press the
STOP button again.

Blanking is forcibly effected.

No blanking is effected.

• Number of lines which can be set for teletext

•The teletext signals which are played back do not satisfy the

ITU-R BT.653 teletext standard perfectly.

For AJ-SD255P:

For AJ-SD255E: