Panasonic BB-HCM331A User Manual
Operating Instructions
116
3.1.6
Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is
clicked.
clicked.
1.
Click [Reset to Factory Default] on the Maintenance page.
2.
Click [Execute].
•
The indicator blinks orange, and then turns off for 10 seconds.
•
All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.
are reset to factory default.
•
If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing
Installation/Troubleshooting.
changes to [Automatic Setup]. Reconfigure the camera seeing
Installation/Troubleshooting.
Notes
•
The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 62). Set it again.
PM mode (see page 62). Set it again.
•
•
Pressing the FACTORY DEFAULT RESET button resets the camera to the
factory default (see page 121).
factory default (see page 121).
•
All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card
are not deleted.
camera to factory default. The buffered images on the SD memory card
are not deleted.
•
The reset operation takes about 1 minute.
•
Do not turn off the camera during the reset operation.