Panasonic BB-HCM331A User Manual

Page of 150
Operating Instructions
2
Main Features
Splash Resistant body for indoor and outdoor use
Your Panasonic Network Camera has a splash resistant body. The splash resistant 
body allows the camera to be used indoors or outdoors.
IPv6
*1
 Network Camera
Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 
was created to address the additional IP addresses that will be needed as the 
Internet continues to expand. Since the camera also supports IPv4 that's currently 
used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For 
more information in IPv6 you wish to visit http://www.ipv6.org/. See page 14 for 
more information.
Audio 2-way Communication
*2
 (Walkie-talkie Type)
Your Panasonic Network Camera now provides 2-way audio, between the camera 
and your PC. You will be able to hear the person on camera and respond using a 
microphone connected to your PC's sound card (customer-provided.) They will 
hear your response through the amplified speaker (customer-provided) connected 
to the camera. The audio feature uses a Java
TM
 applet that is installed during the 
installation procedure.
For example, the camera can be used in the following various locations:
In the baby's room, to hear if the baby is crying.
At the front door, to see and hear who is at the door.
In the children's play room, to see and hear if they are safe.
Note
PLEASE NOTE that under certain circumstances, audio/video recording may 
be PROHIBITED by law. This device should be used only in compliance with 
all applicable federal, state and local statutes.
Better Image Quality
The CCD sensor and the color night view mode provides better image quality and 
low light performance.
The CCD sensor gives you clear image.
You can monitor live video (Motion JPEG) that refreshes its image 30 frames 
per second.
*1
To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 
Tunneling" service. The camera does not work in IPv6-only network.
*2
Audio feature does not work on mobile phones. Talk button and Listen button cannot be used 
simultaneously. It will be supported by the firmware update in the future. In consequence of 
traffic and network environments, the audio may be delayed or may break up.