Panasonic BT-LH1800 User Manual
10
_ GPI hard specification
8 inputs (refer to D-SUB 9-pin terminal)
8 inputs (refer to D-SUB 9-pin terminal)
_ ON/OFF operation
Each terminal of REMOTE operates its assigned function accord-
ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF).
Each terminal of REMOTE operates its assigned function accord-
ing to the setting with GND (Pin 5) shorted (ON) or opened (OFF).
_ How to assign the function to each terminal
The assignment to each terminal can be freely executed by
the On Screen Menu.
(Refer to “How To Use On Screen Menu”.)
The assignment to each terminal can be freely executed by
the On Screen Menu.
(Refer to “How To Use On Screen Menu”.)
Contents
GPI 1–GPI 4
GND
GPI 5–GPI 8
Pin No.
Pin 1–Pin 4
Pin 5
Pin 6–Pin 9
[REMOTE CONFIG]
>GPI1 UNDEF
GPI2 UNDEF
GPI3 UNDEF
GPI4 UNDEF
GPI5 UNDEF
GPI6 UNDEF
GPI7 UNDEF
GPI8 UNDEF
REMOTE CONFIG menu
GPI1
GPI5
MARKER 1
GPI1
GPI5
MARKER 1
1
2
3
4
5
6
7
8
9
REMOTE Specifications
_ Priority order of each function
• When MARKER 1 and MARKER 2 are simultaneously turned
• When MARKER 1 and MARKER 2 are simultaneously turned
ON, the priority is given to MARKER 1.
• 4:3/13:9/14:9 MARKER is displayed only when 16:9 is dis-
played. 95%/93%/88%/80% MARKER is automatically
changed in size according to 4:3 and 16:9 display.
changed in size according to 4:3 and 16:9 display.
• When MARKER HALF and MARKER BLACK are simulta-
neously turned ON, the priority is given to BLACK.
• In case same setting is assigned to a plurality of terminals,
ON operation continues until all terminals turn OFF. (Level
operation terminal only)
operation terminal only)
Ex.) Operation with GPI1 and GPI5 set to MARKER 1:
• In case of edge operation terminal, the priority is given to the
terminal turned ON later.
• In case the operation is impossible, REMOTE terminal will
not operate. (Refer to the example below.)
1) 4:3/13:9/14:9 MARKER display in 4:3 display.
2) HD ZOOM selection in case of a signal other than 1080I,
1) 4:3/13:9/14:9 MARKER display in 4:3 display.
2) HD ZOOM selection in case of a signal other than 1080I,
1035I, 720P signal.
3) SD aspect selection in case of HD.
4) INPUT OP selection when option unit is not installed.
4) INPUT OP selection when option unit is not installed.
*
1)
Operating conditions
Level operation: It operates only while GPI terminal is shorted to
Level operation: It operates only while GPI terminal is shorted to
GND.
Edge operation: It operates at edge of the fall when shorted to
GND.
*
2)
MARKER displayed by PRESET 1 and PRESET 2 is the one se-
lected by the menu for MARKER setting. (It is set by [MARKER]-
[GPI]PRESET 1 and PRESET 2 in the menu.)
[GPI]PRESET 1 and PRESET 2 in the menu.)
*
3)
MARKER HALF and MARKER BLACK are effective only when
4:3/13:9/14:9 MARKER is displayed by using MARKER 1 and
MARKER 2.
MARKER 2.
(For the detail, refer to the “Description of MARKER.”)
All initial
states are
undefined
(UNDEF).
states are
undefined
(UNDEF).
Function
Undefined (terminal assignment
not defined)
not defined)
ON/OFF of marker selected by
PRESET1*
PRESET1*
2)
ON/OFF of marker selected by
PRESET2*
PRESET2*
2)
Background of marker being
displayed is set to HALF.
displayed is set to HALF.
Background of marker being
displayed is set to BLACK.
displayed is set to BLACK.
Input system is changed to A.
Input system is changed to B.
Input system is changed to S.
Input system is changed to
OPTION.
OPTION.
Display change in SD,
16:9 (ON)/4:3 (OFF)
16:9 (ON)/4:3 (OFF)
Display change in HD (1080I,
1035I, 720P), 4:3 (ON) enlarged/
16:9 (OFF)
1035I, 720P), 4:3 (ON) enlarged/
16:9 (OFF)
Brightness of backlight is set to
minimum.
minimum.
[List of Assigning Functions]
Assignment items
UNDEF
MARKER1 ON/OFF
MARKER2 ON/OFF
MARKER HALF
MARKER BLACK
INPUT SEL. A
INPUT SEL. B
INPUT SEL. S
INPUT SEL. OP
SD ASPECT
HD ZOOM
BACKLIGHT OFF
Operating
conditions*
conditions*
1)
––––
Level operation
Level operation
Level operation
Level operation
Edge operation
Edge operation
Edge operation
Edge operation
Level operation
Level operation
Level operation