Panasonic blc30a User Manual
Operating Instructions
24
4.
Display images clicking buttons below.
Notes
•
•
Date, Time and frame number are not displayed in play mode.
•
Maximum number of buffered images change depending on resolution, image
quality and what object the camera buffers. At the 320 x 240 pixels resolution
and the standard quality, the camera buffers about 250 frames (see page 108).
(If 3 trigger settings are enabled, the internal memory capacity is divided into
3 sections. In this case, each trigger can buffer about 80 frames.)
quality and what object the camera buffers. At the 320 x 240 pixels resolution
and the standard quality, the camera buffers about 250 frames (see page 108).
(If 3 trigger settings are enabled, the internal memory capacity is divided into
3 sections. In this case, each trigger can buffer about 80 frames.)
1.4.1
Deleting Buffered Images
If you intend to delete images for each transfer condition, click [Delete Buffered
Images] on the Image Buffer/Transfer page (see page 57 or page 64).
Images] on the Image Buffer/Transfer page (see page 57 or page 64).
Notes
•
•
When you change settings (except for Enable/Disable settings) on the Image
Buffer/Transfer page, the buffered images only for that trigger will be deleted.
Buffer/Transfer page, the buffered images only for that trigger will be deleted.
•
The following operations also delete all buffered images.
•
•
Turning off the camera.
•
Saving the Date and Time page.
•
Restarting, updating firmware or resetting the camera to factory default.
•
Date and time of the day when the
images were buffered are displayed.
images were buffered are displayed.
Date, time and frame number are
displayed.
[Play]:
The buffered images are displayed
continuously.
[<Prev] or [Next>]:
The previous or next image is
displayed.
[<10] or [10>]:
The 10th image before or after the
current image is displayed.
[<100] or [100>]:
The 100th image before or after the
current image is displayed.
displayed.
[Play]:
The buffered images are displayed
continuously.
[<Prev] or [Next>]:
The previous or next image is
displayed.
[<10] or [10>]:
The 10th image before or after the
current image is displayed.
[<100] or [100>]:
The 100th image before or after the
current image is displayed.