Panasonic BT-LH1700WP User Manual

21

The underlined values are factory preset setting values. 

*1 “AUTO” is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the 

input signal, we recommend assigning specific format. 

g COMP. 
The following menus are switched by selecting “RGB-COMP.” in “YP

B

P

R

/RGB” in the “INPUT SELECT” menu. 

The underlined values are factory preset setting values.

 

*1 “EXECUTING” is displayed while “AUTOSETUP” is being executed, and “COMPLETE” is displayed when 

“AUTOSETUP” is completed. 

 

If “AUTOSETUP” cannot be completed, “INCOMPLETE” is displayed. 

*2 Each RGB-COMP. input compatible format can be adjusted.

<AUTO>
<NTSC>
<PAL>

Used to select the input format for VIDEO and Y/C input. 

*1

<AUTO>

Either NTSC or PAL is automatically selected. 

<NTSC>

NTSC

<PAL>

PAL

<75>
<00>

Selects the NTSC setup level. 
<75>

Select this when using with a setup signal of 
7.5 IRE. (The inner parts of the monitor are set 
to the 7.5 IRE setup level to suit the black level)

<00>

Select this when there is no setup level signal. 

<YP

B

P

R

>

<RGB-VIDEO>
<RGB-COMP.>

Selects either YP

B

P

R

 (Component) or RGB input mode. 

<YP

B

P

R

>

Selects the YP

B

P

R

 signal. 

<RGB-VIDEO>Selects the video RGB signal. 
<RGB-COMP.> Selects the PC RGB signal.

<SMPTE>
<B75> 
<B00>

Selects YP

B

P

R

(Component) signal input level. 

<SMPTE>

When the signal level specified in SMPTE is 
Chroma 100 IRE P

B

, P

R

 = 0.7 Vp-p. 

<B75>

Select this when connecting a betacam or 
simliar devices set to 7.5 IRE. (The inner parts 
of the monitor are set at 7.5 IRE setup level to 
suit the black level)

 <B00>

Select this when connecting a betacam or similar 
devices that are not setup to the IRE level.

<G-ON>
<EXT>

Selects the SYNC when using RGB-VIDEO input. 
<G-ON>

Select when a synchronizing signal is 
superimposed on the G signal. 

<EXT>

Select when an external synchronizing signal is 
received in synchronization. 

Performs analog PC settings.  (Refer to “COMP.” below)

AUTOSETUP *1

Screen automatic adjustment is performed when “RGB-
COMP.” is selected in “YP

B

P

R

/RGB” in the “INPUT SELECT” 

menu. “AUTOSETUP” is performed if a different screen is 
displayed, and “YES” is selected. 

<0–60>
(Factory preset settings: 30)

Used to adjust the picture display position in the horizontal 
direction. 

*2

<0–60>
(Factory preset settings: 30)

Used to adjust the picture display position in the vertical 
direction. 

*2

<0–31>
(Factory preset settings:

J page 22)

Used to adjust the clock phase with 1/32 clock phases. 

*2

<700–1800>
(Factory preset settings: 

J page 22)

Used to adjust the sampling clock in dot units. 

*2

<XGA>
<WXGA>

Switches between WXGA and XGA.