Panasonic BT-LH1700WP User Manual
8
SDI (HD/SD) terminal (BNC)
IN1
: This is the SDI input terminal (compatible with HD/SD automatic switching).
IN2
: This is the SDI input terminal (compatible with HD/SD automatic switching).
SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on the screen.
* SDI active through-out is only outputted when [SDI1] or [SDI2] is selected using the [INPUT SELECT]
* SDI active through-out is only outputted when [SDI1] or [SDI2] is selected using the [INPUT SELECT]
buttons. It is not outputted when anything other than SDI is selected.
VIDEO terminal (BNC)
IN
: This is the VIDEO signal (composite signal) input terminal.
OUT : This is the input signal through-out terminal.
Y/C terminal
IN
: This is the Y/C signal (S-video signal) input terminal.
OUT : This is the input signal through-out terminal.
YP
B
P
R
/RGB terminal (BNC)
IN
: This is the YP
B
P
R
/RGB signal input terminal.
OUT : This is the input signal through-out terminal.
* When using the RGB signal, you can also connect the external synchronizing signal to the SYNC/HD
* When using the RGB signal, you can also connect the external synchronizing signal to the SYNC/HD
terminal. When using a PC RGB signal, connect the horizontal synchronizing signal to the SYNC/HD
terminal, and the vertical synchronizing signal to the VD terminal.
terminal, and the vertical synchronizing signal to the VD terminal.
VD IN input terminal
This is the vertical synchronizing signal (VD) input terminal used when connecting to a PC RGB signal.
AUDIO input terminal (Pin terminal)
This is the common audio input terminal for all video input terminals.
* When an embedded audio unit BT-YAE1700G (optional) is attached, SDI input audio is automatically
* When an embedded audio unit BT-YAE1700G (optional) is attached, SDI input audio is automatically
selected by selecting [SDI1] or [SDI2] with [INPUT SELECT].
GPI input terminal (D-SUB 9-pin)
External control is possible by using a GPI signal.
RS232C input terminal (D-SUB 9-pin)
External control is possible by using a RS232C signal.
Rear panel
6
7
8
1
2
3
4
5
Controls and Their Functions
(continued)