Panasonic cf-28mcxxxxx User Manual
2
Functions
Hold down the Fn key and press F2 to change the
brightness.
brightness.
By pressing this key combination, you can select
either an external display
either an external display
*1
, LCD or simultaneous,
even if an external display is not connected.
Rebooting the computer, or powering off then on,
restores the display setting of the Setup Utility. The
combination does not work when the computer is
in the Dual-Display Mode.
Rebooting the computer, or powering off then on,
restores the display setting of the Setup Utility. The
combination does not work when the computer is
in the Dual-Display Mode.
Pressing this key combination turns on/off audio
from the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
from the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
of the internal speakers and headphone jack.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. When the computer is
powered on, by sliding the power switch, the saved
screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack
with sufficient remaining power installed.)
screen on the display to be saved to memory, and
powers off the computer. When the computer is
powered on, by sliding the power switch, the saved
screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack
with sufficient remaining power installed.)
Pressing this key combination displays the remain-
ing battery capacity on the screen. (
ing battery capacity on the screen. (
Pressing this key combination turns off the LCD
and hard disk drive until operation is resumed by
pressing any key or mouse
and hard disk drive until operation is resumed by
pressing any key or mouse
*3
(except the keyboard
and mouse connected to the USB port).
LCD brightness con-
trol
trol
Display change
Speakers on/off switch
Volume control
( down)
( down)
Volume control ( up)
Holding down on the
k e y s c h a n g e s t h e
sound level.
k e y s c h a n g e s t h e
sound level.
Power off using the
suspend function
suspend function
With Windows 98, this
key combination is not
supported
key combination is not
supported
Remaining capacity of
the battery pack
the battery pack
ECO mode for con-
serving power
serving power
Key Combinations
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.
Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F6
Is displayed
when the bright-
ness is at its
maximum value.
Key
Popup Window
OFF
ON
Disabling the speakers will also disable the
warning beep.
warning beep.
Remaining
capacity (%)
display
Battery pack is
not installed.
*2
*2
Down
Up
This key combination cannot be used to adjust
the volume of the warning beep.
the volume of the warning beep.
*
1
The optional port replicator or external display adapter is required for use with an external display.
*
2
When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.
*
3
This “mouse” indicates the touch pad, the touchscreen and an external mouse.
CAUTION
CAUTION
NOTE