Panasonic cf-72n3xxxxx User Manual

44

(

 

 "Starting Up/Shutting Down")

Do not shut down using the standby or hibernation mode.

For more detailed information, refer to the operation manual of the
external display.

Set your external display for  [Monitor] in [Start] - [Settings] - [Control Panel]
- [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change]* and make the monitor settings.

For more detailed information, refer to the operation manual of the exter-
nal display.

When an external display is connected, the computer displays on
both the internal LCD and the external display after Windows starts
up regardless of the [Display] setting in the Setup Utility.
It is possible to change the setting to display only on the external
display or only on the internal LCD with   Fn   +   F3   .
However, in the following cases, the setting cannot be changed with
   Fn   +   F3   .
- When either the internal LCD or external display is set to [Second-

ary] in [Displays] of Display Properties.

-

When the computer is in the Dual-Display mode.
 (

* Windows 2000 : [Monitor] - [ Properties] - [Driver] - [Update Driver].