Panasonic cf-45njxxxxx User Manual

2

Hold down the Fn key and press F2 to change the brightness.

(When the brightness is at its maximum value, 

 is displayed.)

By pressing this key combination, you can select either an external display,

LCD or simultaneous.

Pressing this key combination turns off audio from the internal speaker and

headphone jack.  Pressing it again turns audio back on.

Pressing this key combination adjusts the volume of the internal speaker and

headphone jack.

This key combination cannot be used to adjust the volume of the beep sound.

Pressing this key combination causes the current screen on the display to be

saved to memory, and powers off the computer. When the computer is pow-

ered on again, this same screen will be displayed. (The computer must be

plugged into the AC adapter or have a battery pack with sufficient remaining

power installed.)

Pressing this key combination temporarily disables the power management

feature of the Setup Utility.  ( 

 page26) Pressing it again, or powering the

computer off and then back on enables the power management feature of the

Setup Utility.

Pressing this key combination displays the remaining battery capacity on the

screen.

Pressing this key combination cuts off power to the LCD display until opera-

tion is resumed by pressing any key.

Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the trackball (mouse) or other keys.

Fn   +   F2

Fn   +   F3

Fn   +   F4

Fn   +   F5

Fn   +   F6

Fn   +   F7

Fn   +   F8

Fn   +   F9

Fn   +   F10