Panasonic cf-45njxxxxx User Manual
34
Dealing With Problems
When a problem occurs, please refer to this page. The "Reference Manual" also contains detailed information. If a problem
appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem,
please contact Panasonic Technical Support.
appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem,
please contact Panasonic Technical Support.
Starting Up
The power indicator or bat-
tery indicator is not lit
tery indicator is not lit
is displayed
[POST Start Up Error(s)] is
displayed
displayed
The pre-memor y count,
Windows startup, or an op-
eration is extremely slow
Windows startup, or an op-
eration is extremely slow
The date and time are
incorrect
incorrect
When the previous item is
not the cause
not the cause
Check the cable connection for the AC adapter.
Check to see if a fully charged battery is properly installed.
Check to see if a fully charged battery is properly installed.
Pressing the reset button (
) will solve the problem.
Remove the battery pack and disconnect the AC adapter, then connect them again.
Please input your password. If you have forgotten it, contact Panasonic Technical Support.
page 32
Run [Load Default Settings] (PnP) in the Setup Utility (
page 24
). This will restore the
Setup Utility's settings to their default values (except the password settings). Then, the Setup
Utility must be run once again for you to input the appropriate operating environment settings.
(The processing speed depends on the application software used, so this operation may not cause
the processing speed to increase.)
Utility must be run once again for you to input the appropriate operating environment settings.
(The processing speed depends on the application software used, so this operation may not cause
the processing speed to increase.)
You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel].
If you continue to experience problems, the internal battery maintaining the clock may need
to be replaced. Please contact Panasonic Technical Support.
If you continue to experience problems, the internal battery maintaining the clock may need
to be replaced. Please contact Panasonic Technical Support.
Run [Load Default Settings] (PnP) in the Setup Utility (
page 24
). This will restore the
Setup Utility's settings to their default values (except the password settings).
Try removing all peripheral devices.
In the MS-DOS mode, run SCANDISK to check the hard disk.
At start-up, press
Try removing all peripheral devices.
In the MS-DOS mode, run SCANDISK to check the hard disk.
At start-up, press
F8
to operate the computer in the Safe mode.
The red battery indicator
lights.
Repeated beeps sound while
the computer is in use.
lights.
Repeated beeps sound while
the computer is in use.
The red indicator blinks
After the AC adapter is con-
nected, the orange indicator
blinks five times
nected, the orange indicator
blinks five times
The battery level is low. Save your data and power off your computer.
After connecting the AC adapter or replacing the battery pack with a fully charged one, turn
your computer on.
After connecting the AC adapter or replacing the battery pack with a fully charged one, turn
your computer on.
The battery pack or recharging function may be defective. Quickly remove the battery
pack and disconnect the AC adapter, then connect them again.
If the problem persists, contact Panasonic Technical Support.
pack and disconnect the AC adapter, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. (
)
Battery Indicator