Panasonic cf-27rxxxxxx User Manual

24

Set [Sound Controller] to [Auto] in the Setup Utility.

Select [Start] - [Run].

Type [c:\util\drivers\pccard\disk1\setup.exe], press [OK], then follow the on-screen
instructions.

If a ZV card does not operate properly, install PhoenixCard Manager

TM

 for Win-

dows

®

 95 by following the procedure below, after uninstalling the driver or the appli-

cation software for the card.
Otherwise, do not perform the installation; abnormal operation may result.

When running the power conservation function with the sound chip set,
there may be no sound output.  In this case, the following setting needs to
be made.
In [Control Panel] - [Power] - [OPL3-SAx power management], set [Non Power
Save mode] then press [Apply].  Then press [OK].  (

After PhoenixCard Manager

TM

 for Windows

®

 95 has been installed, make sure to

power off the computer before installing or removing the card.  Also, do not use
the suspend or hibernation functions if the card is installed.

When you decide not to use the ZV card, be sure to perform the uninstall proce-
dure.

  

Uninstall PhoenixCard Manager

TM

 for Windows

®

 95 in [Start] - [Settings] - [Con-

trol Panel] - [Add/Remove Programs].

  

Restart the computer.

Select [PC Card (PCMCIA)] in [Start] - [Settings] - [Control Panel].

Press [Next] at the display for the [Welcome to the PC Card (PCMCIA) Wizard],
press [Next] at the display for the [PC Card (PCMCIA) Wizard] and then press
[Finish].

Shut down the computer by following the on-screen instructions.