Panasonic cf-48v4xx User Manual

21

Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly installed.
Remove the battery pack and disconnect the AC adaptor, then connect them again.

Input your password.  If you have forgotten it, contact Panasonic Technical Support.

 page 19

Press   

   in the Setup Utility (

 

 “Setup Utility”).   This will restore the Setup

Utility’s settings to their default values (except the password settings).  Then, the Setup
Utility must be run once again for you to input the appropriate operating environment set-
tings.  (The processing speed depends on the application software used, so this operation
may not cause the processing speed to increase.)

You can set the date and time using the following menu.

: [Control Panel] - [Date/Time]

: [Control Panel] - [Date, Time, Language, and Regional Options] -

[Date and Time]

  When the computer is connected to a LAN, confirm the date and time of the server.

If you continue to experience problems, the internal battery maintaining the clock may
need to be replaced.  Contact Panasonic Technical Support.

  This computer will not correctly recognize the date and time starting from the year 2100

A.D.

Press   

    in the Setup Utility (

 

 “Setup Utility”).   This will restore the Setup

Utility’s settings to their default values (except the password settings).
Try removing all peripheral devices.

Click [Local Disk(C:)] in [My Computer] with the right button, select [Properties], then
select [Tools] - [Check Now].

Click [Local Disk(C:)] in [start] - [My Computer] with the right button, select [Proper-
ties], then select [Tools] - [Check Now].
At start-up, press    

    to operate the computer in the Safe mode.

Use the Windows password as follows:

Set the password in [Control Panel] - [Users and Passwords], then add the check mark for
[Prompt for password when computer goes off standby] in [Control Panel] - [Power Op-
tions] - [Advanced].

Select the account to change in [Control Panel] - [User Account] and set the password, then
add the check mark for [Prompt for password when computer resumes from standby] in
[Control Panel] - [Performance and Maintenance] - [Power Options].

After reinstalling, setup Windows, then set the password again.

When a problem occurs, refer to this page.  The “Reference Manual” also contains detailed information.  If a problem appears to be
related to a software application, read the software related manual.  If you still cannot troubleshoot the problem, contact Panasonic
Technical Support.