Panasonic cf-27exxxxxx User Manual

6

Suspend function

Hibernation function

Where data is saved to Memory

Hard disk

Fast

Somewhat slow

Requires power supply Yes 

(if power is cut, all data is lost)

Power not required to maintain data

)

If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the suspend or hibernation function.

[Hibernation] is factory set.

The computer should be set for suspend or hibernation (

 see the above procedure).

(After releasing your finger from the power
switch, do not touch the power switch,
keyboard or mouse while the computer is
entering in the suspend or hibernation
modes.)

At the "beep*" sound, release your finger from the power switch.  If you con-
tinue to slide the switch and hold it for more than four seconds, the power will go
off.  Data not previously saved will be lost.
Slide the power switch to power on.
If the computer will not be operated for an extended period of time, it is recom-
mended that hibernation mode be used instead of the suspend mode.

*

When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the

) or by the key combination  

  

Fn   +   F4

   

, there will be no beep

sound.