Panasonic CF-T7 User Manual

30

The battery indicator is 
lights red.

The battery level is very low (the charge is approx. 9% or less).

Connect the AC adaptor. You can use the computer when the indicator light is orange. If 

you do not have an AC adaptor, save your data and power off your computer. After 

replacing the battery pack with a fully charged one, turn your computer on again.

The battery indicator is 
blinking.

If blinking red:

Quickly save your data and power off your computer. Remove the battery pack and dis-

connect the AC adaptor, then connect them again. If the problem persists, contact your 

technical support office. The battery pack or charging circuit may be defective.

If blinking orange:

• Battery cannot be recharged temporarily because the internal temperature of the bat-

tery pack is outside the acceptable temperature range for recharging. Your computer 

can be used normally in this state. Once the range requirement is satisfied, charging 

begins automatically.

• Software applications and peripheral devices (USB devices, etc.) are consuming too 

much power. Exit the software applications currently running. Once the range require-

ment is satisfied, charging begins automatically.

The battery indicator is 
flashing.

The battery is recharging.
If [Battery Charging Indicator] in [Main] menu of the Setup Utility is set to [Flashing], the 
indicator will alternately become lighter and darker.

The cursor does not work.

When using the external mouse, connect it correctly.
Restart the computer by using the keyboard. 
Press  

and 

press  three times, and press   to select [Restart] and press 

Enter

.

If the computer does not respond to keyboard commands, read “No response” (

below).

Cannot input using the 

touch pad.

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

The drivers for some mice may disable the touch pad. Check your mouse’s operating instructions.

Cannot input using the 

touchscreen.

When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work. 

Reinstall the touchscreen driver.

Cannot input using the 

touchscreen as the tablet 

mode.

Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.

Cannot point the correct posi-

tion using the included stylus.

Perform the touchscreen calibration (

page 13).

The Reference Manual is not 
displayed.

Install Adobe Reader. 

<For localized OS model>
A

Log on to Windows as an administrator.

B

Click 

 (Start) and input “c:\util\reader\setup.exe” in [Start Search] then press 

Enter

.

C

Update Adobe Reader to its latest version.

If your computer is connected to the internet, start up Adobe Reader and click [Help] - 

[Check for Updates].

<For MUI OS model>
(

page 13)

[System Restore] does not 
appear by pressing F8.

The restoration program does not run after Windows Anytime Upgrade is executed.
For further information, access the following web site:
https://eww.pavc.panasonic.co.jp/pc/itn/support/vistainfo.html

No response.

Press 

Ctrl

+

Shift

+

Esc

 to open Task Manager and close the software application that 

is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another 
window. Press 

Alt

+

Tab

 to check.

Slide the power switch for four seconds or longer to shut down the computer, and then slide 
the power switch to turn it on. If the application program does not work normally, uninstall and 
reinstall the program. To uninstall, click 

 (Start) - [Control Panel] - [Uninstall a program].

Unable to input password

Some keyboards have unusable keys (e.g. the “

M

” key on French keyboards). 

Use the other key when you press the key and the alarm sounds.