Panasonic cf-y2 User Manual

16

1

Press and hold the latch (A) located at the front.

2

Lift open the display.

Do not open the display wider than necessary (170° or more).
Do not apply excessive pressure to the LCD.  Also, do not hold the LCD when
opening or closing the display.

Slide the power switch 

 and hold it for approximately one second until the power

indicator 

 turns on before releasing it.

  Do not slide the power switch and hold it for more than four seconds; this will

cause the power to be turned off forcibly.
While booting, avoid the following until the hard disk drive indicator 

 has

turned off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, or external mouse operations.
• Closing the display.
• Touching the drive power/open switch.

  Do not slide the power switch repeatedly.

Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating.  Should this happen, allow the computer to cool down
then switch the power on again.
If the computer still does not power on, contact your technical support office.
(

 page 50)

After confirming that the hard disk drive indicator 

 has turned off, select the user

and input the password, then select 

.  Until the correct password is entered, the

computer will not operate.

You are able to start working on your computer.