Panasonic cf-y2 User Manual
39
T
roub
leshooting
<When the hard disk backup function has been enabled>
If you select [1] or [2], the message [The Backup function
has been enabled. If [Recovery] is executed, the Backup
function will be disabled, and your Backup data will be
lost.] appears. In this case, press
If you select [1] or [2], the message [The Backup function
has been enabled. If [Recovery] is executed, the Backup
function will be disabled, and your Backup data will be
lost.] appears. In this case, press
Y
.
If the message [Computer must be rebooted in order to
execute [Recovery.]] appears, press
execute [Recovery.]] appears, press
R
.
9
At the confirmation message, press
Y
.
The operation of reinstallation for the hard disk starts auto-
matically. (The operations take about 20 minutes.)
matically. (The operations take about 20 minutes.)
After the reinstallation procedure completes, this screen
should appear.
should appear.
10
Remove the Product Recovery DVD-ROM, and then press
any key.
The computer will be shut down.
any key.
The computer will be shut down.
11
Turn on the computer, and press
F2
while [Pana-
sonic] boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.
12
Press
F9
.
At the confirmation message, select [Yes] and press
Enter
. (The Setup Utility settings will return to their
default values. Even the security settings with the excep-
tion of the password(s) will return to their default values.)
tion of the password(s) will return to their default values.)
13
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
14
Perform the setup procedure for Windows by following the
instructions on the screen (
instructions on the screen (
page 13 -14).
15
Run the Setup Utility and change the settings where neces-
sary.
sary.
16
If you can connect to the Internet, perform Windows Up-
date.
date.
Do not interrupt the reinstallation procedure before
completion, for example by turning off the computer
completion, for example by turning off the computer
or pressing
Ctrl
+
Alt
+
Del
, as this may
prevent Windows from starting up, or may cause data
to be lost so that the reinstallation procedure cannot
be executed.
to be lost so that the reinstallation procedure cannot
be executed.
CAUTION
-----------------------------------------------------------------------
[Recovery] is complete.
Windows(R) XP Professional install wizard will start after reboot.
Please remove the Product Recovery DVD-ROM, and turn off the computer.
Windows(R) XP Professional install wizard will start after reboot.
Please remove the Product Recovery DVD-ROM, and turn off the computer.
------------------------------------------------------------------------
<Changing the drive letter>
You can change the drive letter for the DVD-ROM & CD-R/
RW drive or hard disk drive by the following steps.
You can change the drive letter for the DVD-ROM & CD-R/
RW drive or hard disk drive by the following steps.
Drive letters can only be changed when two or more parti-
tions have been created on the hard disk drive. The name of
the C: drive cannot be changed.
We recommend that you make these changes before install-
ing applications.
tions have been created on the hard disk drive. The name of
the C: drive cannot be changed.
We recommend that you make these changes before install-
ing applications.
1
Select [start] - [Control Panel] - [Performance and Mainte-
nance] - [Administrative Tools] - [Computer Management].
nance] - [Administrative Tools] - [Computer Management].
2
Select [Disk Management] from [Storage].
3
Right click on the partition of the hard disk or the name of
the DVD-ROM & CD-R/RW drive and select [Change Drive
Letter and Paths...].
the DVD-ROM & CD-R/RW drive and select [Change Drive
Letter and Paths...].
4
Select [Change].
5
Select [Assign the following drive letter] and select the new
drive letter, and then select [OK].
drive letter, and then select [OK].
6
At the confirmation message, select [Yes].