Panasonic cf-y2 User Manual
43
Appendix
1
Turn the computer on, and press
F2
while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.
If a password has been set, enter the Supervisor Password.
You cannot register [Boot] menu with a User Password.
2
Select [Boot] menu, then select [CD/DVD Drive] and press
F6
until [CD/DVD Drive] is at
the top of [Boot] menu.
3
Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW drive.
When disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Perform the following
procedure.
Set [CD/DVD Drive Power] to [On].
↓
Press
procedure.
Set [CD/DVD Drive Power] to [On].
↓
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
↓
Press
↓
Press
F2
while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
↓
Set the Product Recovery DVD-ROM, and execute Step
↓
Set the Product Recovery DVD-ROM, and execute Step
4
.
4
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart. If [Enter Password] is displayed during the following procedures, input
the Supervisor Password or the User Password.
This screen should appear.
the Supervisor Password or the User Password.
This screen should appear.
Regarding backup area
• Requires availability of at least half of the entire hard disk. Without sufficient space
• Requires availability of at least half of the entire hard disk. Without sufficient space
available, the backup area cannot be created.
• When the backup area is created, the usable hard disk capacity will be reduced to less
than half.
• The backup area cannot be accessed from Windows. For this reason, backed up data
cannot be copied to CD-R or other removable disk media.
• When the hard disk backup function is executed, data in the backup area will be over-
written. If newly created or edited data is backed up later, data stored previously
in the backup area will be lost.
in the backup area will be lost.
NOTE
Create a Backup Area
When dividing the hard disk into partitions
Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard disk
backup function cannot be enabled after the hard disk has been partitioned. Use proce-
dure
Do not execute [1. [Recovery]] to divide the hard disk into partitions. The hard disk
backup function cannot be enabled after the hard disk has been partitioned. Use proce-
dure
7
to divide the hard disk.
CAUTION
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. [ Recovery
] Reinstall Windows.
2. [ Erase HDD ] Erase the whole data on HDD for security.
3. [ Backup
3. [ Backup
] Enable the Backup function.
0. [ Cancel
] Cancel.
---------------------------------------------------------------------
5
Press
3
to execute [3. [Backup]].
6
At the confirmation message, press
Y
.