Panasonic cq-dfx802n User Manual

CQ-DFX802N

54

Caution: Please follow the instructions given below.  Failure to do so will cause damage to the unit and speakers.

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.

¡Use ungrounded speaker only.
¡The maximum speaker output should be 50 W or more.  (If used with

the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)

¡The speaker impedance should be 4 - 8 

Ω.

¡This unit uses the BTCL circuit, so each speaker should be connected

separately using parallel vinyl insulated cords.

¡The speaker cords and the power amplifier unit should be kept away

(about 30 cm apart) from the antenna and antenna extension cord.

¡Never connect the speaker cord to

the body of the car.

¡Do not use a 3-wire type speaker

system having a common earth
lead.

¡Do not connect more than one

speaker to one set of speaker
leads.

¡When the top surface of the touch panel has become dirty, use the included wiping cloth to wipe the surface thoroughly.

Under no circumstances should detergents or other such cleaning substances be used for this purpose.

¡Do not allow the to surface of the touch panel to be caught by your fingernails or any hard objects.  If you do so, you

may damage or break the glass on the top surface of the touch panel.

Before cleaning, turn off the ignition or remove the front panel.

Never use solvents such as benzine, thinner as they may
mar the surface of the unit.

Use a dry, soft cloth to wipe.