Panasonic cq-c3200u User Manual
52
CQ-C3400/3300/3200/3100U
CQ-C3400/3300/3200/3100U
53
+
-
+
-
+
-
+
-
FRONT SP
REAR SP
ACC
BATTERY 15 A
CD.C-IN
S.W-OUT
L
R
CQ-C3400U
CQ-C3300U
CQ-C3200U
CQ-C3100U
CQ-C3400U
CQ-C3200U
Electrical Connections
Caution:
≥ This product is designed to operate with a 12 V
≥ This product is designed to operate with a 12 V
DC, negative ground battery system.
≥ To prevent damage to the unit, be sure to follow
the connection diagram below.
≥ Remove approximately
1
/
4
q (5 mm) of protective
covering from the ends of the leads before
connecting.
connecting.
≥ Do not insert the power connector into the unit
until the wiring is completed.
≥ Be sure to insulate any exposed wires from
a possible short-circuit from the car chassis.
Bundle all cables and keep cable terminals free
from touching any metal parts.
Bundle all cables and keep cable terminals free
from touching any metal parts.
≥ Remember, if your car has a drive computer or
a navigation computer, the data of its memory
may be erased when the battery terminals are
disconnected.
may be erased when the battery terminals are
disconnected.
Accessory used for wiring
Wiring Diagram
No.
Item
Q’ty
6
Power connector
1
External amplifi er control power lead (max. 500 mA)
This lead is for connection to the power amplifi er.
This lead is for connection to the power amplifi er.
Note:
≥ This lead is used for power control when an external
≥ This lead is used for power control when an external
power amplifi er is connected. The power supply of a
power amplifi er will be activated when turning on the
power of this unit.
power amplifi er will be activated when turning on the
power of this unit.
Dual CD changer control lead
Antenna control lead
(to motor antenna) (max. 500 mA)
This lead is not intended for use with switch actuated
power antenna.
(to motor antenna) (max. 500 mA)
This lead is not intended for use with switch actuated
power antenna.
ACC power lead
To ACC power,
To ACC power,
i12 V DC.
Battery lead
To the car battery, continuous
To the car battery, continuous
i12 V DC.
Ground lead
To a clean, bare metallic part of the car chassis.
To a clean, bare metallic part of the car chassis.
Note:
≥ Insulate this lead with vinyl tape when you do not
≥ Insulate this lead with vinyl tape when you do not
connect it.
Note:
≥ The power antenna extends automatically when the
≥ The power antenna extends automatically when the
AM/FM radio mode is selected.
Antenna
(Blue/white stripe)
(Brown/white stripe)
(Blue)
(Red)
(Yellow)
(Black)
CD changer control
connector
connector
Subwoofer cord
CD changer input cord
Monaural
(red)
(white)
R (red)
L (white)
6 Power connector
Fuse (mini auto fuse type, 15 A)
≥ If the fuse (rear panel) blows frequently, they may be
≥ If the fuse (rear panel) blows frequently, they may be
something wrong with the unit or wiring connection.
Consult your nearest Panasonic Servicenter for service.
Front speaker lead
Rear speaker lead
(White)
(White/black stripe)
(Gray)
(Gray/black stripe)
Left
To front
speaker
speaker
Right
Caution:
≥ Do not connect more than
≥ Do not connect more than
one speaker to one set of
speaker leads.
speaker leads.
E
N
N
G
L
I
S
H
H
33
E
N
N
G
L
I
S
H
H
34
Left
To rear
speaker
speaker
Right
(Green)
(Green/black stripe)
(Violet)
(Violet/black stripe)
Pre-amp output
connector (rear)
connector (rear)
Pre-amp output
connector (front)
connector (front)
L (white)
R (red)
R (red)