Panasonic cq-d5501u User Manual
35
1
E
N
N
G
L
I
S
H
H
CQ-D5501U
34
Turn [VOLUME].
q : Up
w : Down
w : Down
Turn [VOLUME].
q : Up
w : Down
w : Down
Note:
¡ You cannot save
¡ You cannot save
any SQ presetting
value in [1] button.
value in [1] button.
¡ Any SQ adjust-
ments will not
change the call up
screen names such
as ROCK and JAZZ.
change the call up
screen names such
as ROCK and JAZZ.
Turn [VOLUME].
q : Up
w : Down
w : Down
34
33
E
N
N
G
L
I
S
H
H
CQ-D5501U
Audio Settings
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid
: ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control frequency is fixed to the frequency
¡ The bass/treble control frequency is fixed to the frequency
that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
w Press and hold [BAND] for more than 2 seconds.
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
The SQ adjustment mode can be
established also by pressing [SQ]
for more than 2 seconds.
established also by pressing [SQ]
for more than 2 seconds.
Volume
Default: 18
Setting range: 0 to 40
Setting range: 0 to 40
Press [VOLUME] (PUSH SEL)
to open the menu.
to open the menu.
[DISP] (Return to the regular mode)
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
Turn [VOLUME]. (Press [VOL
}
] or
[VOL
{
] on the remote control unit.)
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
onds in the SQ adjustment), the display returns to the regular mode.
¡ The volume can also be adjusted directly using [VOLUME] on the main unit. (
a
Page 12)
¡ Please refer to page 13 for calling up a preset SQ.
VOLUME
BASS
SUBW LPF
SUBW LEV
FADER
SQ SET
Regular mode
TREBLE
BALANCE
[SQ] (Sound Quality)
q
Press [[] or []] to select a frequency
band (Low, Mid, High).
[[]
[[]
: Higher frequency band
[]]
: Lower frequency band
Turn [VOLUME] to select a frequency.
q: Higher frequency
w: Lower frequency
q: Higher frequency
w: Lower frequency
w
Press [}] or [{] to adjust the level.
[}]: Up
[{]: Down
[{]: Down
e
Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the num-
ber of the selected button, and return
to the regular mode resumes.
to the regular mode resumes.
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
the SQ preset.
[[] / []]
[{] / [}]
[BAND]
[BAND]
Preset Buttons [2] to [6]
(Page 36)
Level
The selected frequency band
blinks.
blinks.
Frequency